00198124-02_JC_PM_WF4_TX_EN.pdf - 第18页
www.asm-smt.com
1 WF 4 TX-Series Maintenance Test the tape cutter 2 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C1
www.asm-smt.com
13 Press stop. 14 Open the cover. 15 Remove paper.
16 Check edge for clean cut. 17 If NOT OK inform service. 18 Close the cover.
www.asm-smt.com
2 WF 4 TX-Series Maintenance Shut down and remove tables and exchange nozzles with JTF-ML 4 min 1 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part:
W2, W35
Consumables:
www.asm-smt.com
1 With JTF-ML: Without JTF-ML, please go
to next task.
2 Click on "prepare for exchange and shut-
down" icon.
3 Click on "shutdown machine" icon.
4 Press stop button. 5 Open the cover 2. 6 Press remove COT button.