00198124-02_JC_PM_WF4_TX_EN.pdf - 第76页
www.asm-smt.com
23 WF 4 TX-Series Maintenance Endurance run 5 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 Click on "endurance run after mainten-
ance" icon.
2 Check results. 3 If result is NOT OK (red cross) save report
and contact service.
4 Click on "display production status" icon. 5 Stop production and click on "block trans-
port" icon.
6 Unblock both lanes and click "OK".
www.asm-smt.com
www.asm-smt.com
Appendix Safety Circuit
TX checklist for the safety circuit.
1 Test the function of all emergency buttons If it is not working switch off the machine immediately and call the
service
2 Test the function of the safety switches for all component trolleys If it is not working switch off the machine immediately and call the
service
3 Test the function of the safety switches at all machine covers If it is not working switch off the machine immediately and call the
service
4 Check about the mechanical function and damages at the cover
switches
If it is not working switch off the machine immediately and call the
service
5 Test the function of the sensor switches for all nozzle reject bins If it is not working inform immediately the service
6 Test the function of the sensor switches for all component reject
bins
If it is not working inform immediately the service
7 Test the function of the sensor switches for all nozzle magazines
C&P 20 A/M/P, CPP
If it is not working inform immediately the service