00198124-02_JC_PM_WF4_TX_EN.pdf - 第50页
www.asm-smt.com
14 WF 4 TX-Series Maintenance Check and lubricate the docking unit 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C4, C31, C32
www.asm-smt.com
1 Grease the engaging pin. 2 Grease the hooks at both sides. 3 Repeat steps 1 and 2 for other docking
unit.
www.asm-smt.com
15 WF 4 TX-Series Maintenance Clean feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from feeder
modules.
2 Cut the remaining tape directly at the
feeder.
3 After cutting: Ensure to leave 2 holes over-
lapping.
4 Repeat steps 1-3 for other feeder tables.