00198124-02_JC_PM_WF4_TX_EN.pdf - 第26页
www.asm-smt.com
4 WF 4 TX-Series Maintenance Empty and clean nozzle reject bin 2 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T2
Wear Part: Consumables:
C3
www.asm-smt.com
1 Remove the nozzle reject bin. 2 Empty the reject bin into a waste box. 3 Clean the reject bin.
4 Return the reject bin and repeat steps for
all gantries.
www.asm-smt.com
5 WF 4 TX-Series Maintenance Remove the TH 10 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7; T8, T9, T31, T87
Wear Part: Consumables:
www.asm-smt.com
1 Move the gantries to a good working posi-
tion.
2 Loosen the two screws fastening the cam-
era visual shield: TH.
3 Unplug the 3 compressed air connections
from the left segment.
4 Disconnect the ribbon cables from the left
head segment.
5 Remove 3 screws fixing the left head seg-
ment (1) to (3).
6 Hold the segment and remove the last
screw and take the head segment away.