CP6 series maintenancech45 周保养.pdf - 第16页
2.1 XY -T able Lubrication <CP-6/6E, CP-6M/6ME> Arrow marks in the illustration indicate lubrication points. Black arrows indicate points where a grease gun is required. Apply to the Y-axis ball screw Apply to the …
• Lubrication points and procedure
Areas requiring lubrication are indicated in the diagrams by arrows and numbers.
Locations indicated by white arrows signify that grease or oil should be applied to the
surface of the part being lubricated. Black arrows are used to indicate grease nipples and
signify that grease should be inserted using a grease pump.
Note: Even in the case of LM blocks that do not have a nipple, by applying grease between the
block and LM rail (bearing mechanism), the grease that adheres to the ball bearings and
rollers will serve to lubricate the LM block.
• Lubrication checklist
A lubrication checklist is provided at the end of this chapter.
This checklist should be used as follows:
1. Check the lubrication points corresponding to the reference numbers shown in the
illustrations.
2. Place a check in the box under "Check".
LM rail
LM block
Chapter 4 Cleaning and Lubrication
Version 11.3 4-2-2 CP-6 Series Maintenance
2.1 XY-Table Lubrication
<CP-6/6E, CP-6M/6ME>
Arrow marks in the illustration indicate lubrication points.
Black arrows indicate points where a grease gun is required.
Apply to the Y-axis ball screw
Apply to the X-axis ball screw
(1) :
(4) :
Z-axis
CP6ML008E
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(9)
(8)
(8)
(8)
(8)
(10)
(10)
(11)
Gear, Rack gear
Z-axis cam side
Z-axis LM rail
LM rail
Shaft
AFC Grease
Daphne
Eponex No. 2
N/A
N/A
N/A
N/A
N/A
N/A
N/A
✔
✔
✔
N/A
✔
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
✔
T001E
Lubrication
Locations
Lubrication
Frequency
Types of Lubricants
1
2
3
4
5
6
7
8
9
10
11
Every month
Every week
Every month
Every month
Every week
Every month
Every week
Every month
Every month
Every month
Every month
✔ : Lubricate N/A : Do not lubricate
Ball screw
Ball screw
LM
guide
LM rail
LM block
LM
guide
LM rail
LM block
Chapter 4 Cleaning and Lubrication
Version 11.3 4-2-3 CP-6 Series Maintenance
<CP-642-642E, CP-642M/642ME, CP-643E/643ME>
Arrow marks in the illustration indicate lubrication points.
Black arrows indicate points where a grease gun is required.
Same for Y-axis
Z-axis ball screw:
Apply multemp LRL3 or SRL3
CP6ML010E
(12)
(13)
(13)
(14)
(15)
(16)
(16)
(17)
(18)
Multemp
LRL3
Multemp
SRL3
Z-axis ball screw
Daphne
Eponex
No. 2
N/A
N/A
N/A
N/A
N/A
N/A
✔
✔
✔
✔
✔
✔
✔
N/A
N/A
N/A
N/A
N/A
N/A
N/A
✔
T017E
Lubrication
Locations
Lubrication
Frequency
Types of Lubricants
12
13
14
15
16
17
18
Every month
Every week
Every month
Every month
Every week
Every month
Every month
✔ : Lubricate N/A : Do not lubricate
Ball screw
Ball screw
LM
guide
LM rail
LM block
LM
guide
LM rail
LM block
(Except for
CP-643E/643ME)
(Only for
CP-643E/643ME)
Chapter 4 Cleaning and Lubrication
Version 11.3 4-2-4 CP-6 Series Maintenance