CP6 series maintenancech45 周保养.pdf - 第51页
4. Replacing the W aste T ape Cutter Point If waste tape is not being cut properly, tape feed may jam. In such cases, replace the waste tape cutter. Procedure W arning • Confirm that the power is off before work is start…
Notes:
Chapter 5 Replacing Consumable Parts
Version 11.0 5-3-2 CP-6 Series Maintenance
4. Replacing the Waste Tape Cutter
Point
If waste tape is not being cut properly, tape feed may jam. In such cases, replace the
waste tape cutter.
Procedure
Warning
• Confirm that the power is off before work is started.
• Exercise extreme caution when working on the machine if the cam is
not at its origin (0 deg.). Recoil of the cam axis can endanger the
operator.
Remove the cutter by unscrewing the two bolts on the moving and two bolts on the fixed
cutter. Put in a new cutter and re-tighten the two bolts.
Movable blade
Fixed blade
CP6MR004E
Chapter 5 Replacing Consumable Parts
Version 11.0 5-4-1 CP-6 Series Maintenance
Notes:
Chapter 5 Replacing Consumable Parts
Version 11.0 5-4-2 CP-6 Series Maintenance