00197961-01_UM_JTF-MW_on_SIPLACE_E_en_FINAL.pdf - 第49页
Tasks on the Machine Operating the JEDEC Tray Feeder in the Station Software (SW708) User Manual JTF-MW on SIPLACE E 49 8. Feeder o n location (arrow keys for selectin g the feeder) 5.5.4.1 5 . 5 . 4 . 1 S I P L A C E J …
Tasks on the Machine
Operating the JEDEC Tray Feeder in the Station Software (SW708)
48 User Manual JTF-MW on SIPLACE E
Track information view
1. SIPLACE JTF-MW
2. Abbreviation for the SIPLACE JTF feeder (visualization)
3. The Settings… menu is not active until the relevant track has been selected (highlighted in blue
color)
4. Change button to switch back to the Current setup view.
5.5.4
5.5.4 SIPLACE-JTF-MW Settings
SIPLACE-JTF-MW Settings
► In the Current setup view or in the Track information view, select the relevant track and click
Settings…
JTF-MW settings
1. The selected tray (tray 5 in this example) is framed and displayed as Level 5.
2. Tray occupancy of the SIPLACE JTF-M - If components are set up, the tray is displayed in green
color.
3. Selection buttons for trays (selection via cursor is possible as well)
4. Position 1 (Tray at Position 1)
5. Picture of the selected tray (tray 5) visualizing the current occupancy.
In this example, this first row has already been picked up. (Gray = occupied, white = empty)
6. Direction of supply
7. Information on the component that is currently in the feeding position
Tasks on the Machine
Operating the JEDEC Tray Feeder in the Station Software (SW708)
User Manual JTF-MW on SIPLACE E 49
8. Feeder on location (arrow keys for selecting the feeder)
5.5.4.1
5.5.4.1 SIPLACE JTF-MW Settings – Functions
SIPLACE JTF-MW Settings – Functions
Example –SIPLACE JTF-MW Settings - Functions
The Settings menu provides a rough distinction of the functions.
1. Operating functions of the trays
2. Carrier window
3. Filling level functions for the selected tray
4. Change button to switch to the level view of the SIPLACE JTF-MW trays
5. Tray position correction
Operating Functions of the Trays (1)
Button
Move to Refill position ▪ The tray is moved from the transfer position back into the tray
carrier.
▪ If necessary, the "Stop production" function must be per-
formed.
▪ The tray is moved to the refill position and the carrier can be
removed from the SIPLACE JTF-MW..
Provide Level ▪ Selection of the level / tray in the carrier window (directly by
using the cursor or the arrow keys).
▪ The tray is then displayed in a frame.
▪ The tray is moved into the pickup / transfer position (tray at
position 1).
▪ If you select a different tray in the carrier window, this tray is
automatically moved into the pickup / transfer position (tray at
position 1).
Confirm Exchange of Cassette ▪ All trays in the carrier are set to full and the exchange is con-
firmed.
Exchange of Tray Carrier ▪ Only the selected tray in the carrier window is set to full and
the exchange is confirmed.
Tasks on the Machine
Operating the JEDEC Tray Feeder in the Station Software (SW708)
50 User Manual JTF-MW on SIPLACE E
Filling Level Functions for the Selected Tray (3)
Change filling level - pocket 134
The current filling level displays pockets 1 to 134 as occupied. Pockets 135 to 160 are displayed as emp-
ty.
Button
Activate ▪ Currently without information or function.
Set Full ▪ Sets the selected tray to full (every component in the tray is
displayed in gray color).
Set Empty ▪ Sets the selected tray to empty (every component in the tray
is displayed in white color)
Change Filling Level ▪ Opens a virtual tray. You can directly select the last occupied
pocket of the tray that contains a component.
▪ An arrow represents the numbering direction that also corre-
sponds to the pickup direction.
▪ The transfer position is always at the top.
▪ In the following example, pocket 134 is selected as the pocket
that contains the last component. Pockets 135 to 160 shall be
empty.
▪ Please note that the selected pocket is difficult to recognize.