00197961-01_UM_JTF-MW_on_SIPLACE_E_en_FINAL.pdf - 第6页

Introduction Module Description 1.1.4 Correct Usage 6 User Manual JTF-MW on SIPLACE E 1.1.4 1 . 1 . 4 C o r r e c t U s a g e Correct Usage The product may only be used for the application cases describe d in the catalog…

Introduction

1.1.1 Warranty Module Description

User Manual JTF-MW on SIPLACE E 5

1 Introduction

Introduction

This manual provides technical information and describes how to operate the SIPLACE JTF-MW JEDEC

tray feeder in machines of the SIPLACE® E series efficiently and safely.

1.1

1.1 Module Description

Module Description

The SIPLACE JTF-MW is an automatic and fast changer for standard JEDEC waffle pack trays .On

SIPLACE E machines, a JTF-MW tray feeder can be installed on a changeover table. The SIPLACE

JTF-MW occupies a fixed area of tracks on the changeover table.

The SIPLACE JTF-MW stores up to 30 JEDEC waffle pack trays in a cassette and supplies them as re-

quired.

The placement machine can therefore be supplied with different component types at variable changeo-

ver times.

1.1.1

1.1.1 Warranty

Warranty

The user shall report claims immediately within two weeks to the manufacturer.

The user shall provide all evidences and carries all the burden of proof.

In case of a defect ASM has the right to deliver replacement or to rework. ASM has the right to refuse a

demand from user if this high costs are involved.

Usually the warranty term is 12 months on parts starting with delivery. No compensation is granted from

ASM.

1.1.2

1.1.2 Type Plate and Serial Number

Type Plate and Serial Number

The JTF-MW has a type plate on its side which specifies the type, material and serial number.

▪ Type: SIPLACE JTF-MW

▪ Material No./Material-Nr.: 03118894-XX

▪ Serial No.: J0001 to J9999

1.1.3

1.1.3 EU Declaration of Conformity

EU Declaration of Conformity

The product/device described below conforms to the regulations and standards listed in the EU Decla-

ration of Conformity provided.

Manufacturer

ASM Assembly Systems Singapore Pte ltd

2 Corporation Road

#01-03 Corporation Place

Authorized Representative in Europe

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany

Model JEDEC tray feeder

Type SIPLACE JTF-MW

Item no.: 03118894-XX

Introduction

Module Description 1.1.4 Correct Usage

6 User Manual JTF-MW on SIPLACE E

1.1.4

1.1.4 Correct Usage

Correct Usage

The product may only be used for the application cases described in the catalogues and technical spec-

ifications i.e. for placement of SMD components and only in connection with the third party devices and

components recommended or approved by SIPLACE.

Any other use is deemed to be incorrect and not as prescribed.

If the product is not used as prescribed, SIPLACE will accept no liability for any damage that may occur

and will not guarantee that the components will work properly and without problems.

Prescribed or correct usage includes the observance of all the instructions in the user manual.

The proper and safe operation of the product requires correct transportation, storage, installation and

assembly, plus careful, accurate utilization and servicing.

1.1.5

1.1.5 Incorrect Usage

Incorrect Usage

Failure to use the product as prescribed can result in both danger to life and limb and material damage.

For this reason, non-prescribed usage is prohibited. If the product is not used as prescribed, ASM As-

sembly Systems GmbH & Co. KG will not accept liability for any damage that may occur and will not

guarantee that the components will work properly and without problems.

Non-prescribed use of the module includes the following examples:

▪ Operation of the module with safety equipment deactivated or removed.

▪ Placement of components that do not meet the permitted specification.

▪ Use of unauthorized accessories and additional modules.

▪ Use of the module by unqualified personnel.

1.1.6

1.1.6 Noise Emissions

Noise Emissions

1.1.7

1.1.7 Environmentally-Friendly Disposal of Materials and Components

Environmentally-Friendly Disposal of Materials and Components

SIPLACE products are manufactured using only materials and parts that can be easily separated and

disposed of in an environmentally-friendly way.

1.1.8

1.1.8 Electromagnetic Compatibility (EMC)

Electromagnetic Compatibility (EMC)

All SIPLACE products are designed and tested for professional use in industrial applications. Electro-

magnetic compatibility in terms of the emission of interference cannot be guaranteed in any other envi-

ronment.

1.1.9

1.1.9 Use of Original SIPLACE Accessories and Spare Parts

Use of Original SIPLACE Accessories and Spare Parts

Only use original spare parts and authorized accessories. The use of other parts will affect safety and

will invalidate the liability for any consequential damage.

Maximum noise level 75 dB (A)

NOTICE

Observe the applicable regulations

The company operating the system has sole responsibility for the proper, environmentally-

friendly disposal of machines, working materials, consumables and wear parts.

► Please observe your national statutory provisions for waste disposal and environmental

protection.

Introduction

1.2.1 Contents and Filing of this Manual Important Notes about the User Manual

User Manual JTF-MW on SIPLACE E 7

1.2

1.2 Important Notes about the User Manual

Important Notes about the User Manual

1.2.1

1.2.1 Contents and Filing of this Manual

Contents and Filing of this Manual

This user manual contains basic information that must be observed for a safe and efficient handling of

the feeder.

The service engineers, qualified staff, operators and users must therefore read it before commencing

installation and commissioning. The instructions must be kept permanently accessible wherever the ma-

chine is used.

In addition, the user must ensure that the employees have fully understood the contents of the user man-

ual.

Images are made for proper understanding and can differ slightly to the real environment.

Further Applicable Documents

This feeder shall be installed on a platform (Pick&Placer, Handler, Tester, customer etc.) or any other

host machine. For the use of that also the manual of the host machine must be read and understood.

1.2.2

1.2.2 Danger Notes

Danger Notes

1.2.3

1.2.3 Liability of the Manufacturer/Supplier

Liability of the Manufacturer/Supplier

We draw your attention to the fact that these instructions only contain descriptive and explanatory ma-

terial and do not include any contractual conditions or undertakings. All obligations of ASM Assembly

Systems GmbH & Co. KG are conclusively specified in the respective contract, on the basis of which you

have received the machine described therein. This applies in particular to all statements regarding per-

formance or service life and the agreed liability for faults or defects. The provisions of the contract re-

garding the liability for faults or defect are neither extended nor restricted by any statements in this

manual.

1.2.3.1

1.2.3.1 Limited Liability

Limited Liability

ASM Assembly Systems GmbH & Co. KG is not liable for damages and secondary damages, if the feed-

er is not used according to the intended use. All data and details of this manual are made according to

actual norms and instructions, best available technology and based on long term insight and experienc-

es.

ASM Assembly Systems GmbH & Co. KG is not liable for damages based on:

• Nonobservance of this manual

• Non Intended Use

• Labour of non trained gents

• Unautorized upgrades

• Technical changes

• Use of not autorized spare parts

The true scope of delivery can vary for custom solutions or for special options needed. Also for changes

in technology.

WARNING

Danger notes

► Work may only be performed on the SIPLACE JTF-MW if the personnel concerned have a

thorough knowledge of the relevant section of the user manual.

► All work must be carried out by appropriately trained and qualified personnel.

► All warnings, cautions and hazard notes must be observed.

► Read chapter 2 Operational Safety of the user manual through carefully.