YG300_Mainte_E.pdf - 第14页
x Before using the machine 1 . 4 Wa r n i n g l a b e l p o s i t i o n s Wa r n i n g l a b e l s w i t h i n f o r m a t i o n n e e d e d t o u s e t h e m a c h i n e s a f e l y a n d c o r r e c t l y a r e a f f i…
ix
Before using the machine
Do not use any solvent other than specified
23001-G0-2L
c
CAUTION
Using other than the specified solvents might damage the machine or create a fire hazard.
Pull out the cleaning unit before opening/closing the cover having the following label
23001-G0-3R
c
CAUTION
Before opening or closing the cover affixed with this label, pull out the cleaning unit to avoid possible damage.
Close cover before operating FDD or USB memory drive
23001-G0-0T
c
CAUTION
Before operating the FDD or USB memory drive to copy data, always close the media access cover to prevent dust
from adhering to the FDD or USB port and to protect the floppy disk or USB memory device from electrostatic noise.
x
Before using the machine
1.4 Warning label positions
Warning labels with information needed to use the machine safely and correctly are affixed to the machine
and peripheral equipment. Be sure to comply with the instructions on these warning labels.
Warning label position
N Safety cover (open/close cover) inner side
N Signal cable connector
(Rear on left side)
N Safety cover (open/close cover)
N Media port
Media port
N Front lower panel
N Signal cable connector
(Rear on right side)
N Feeder section
53000-F1-00
xi
Before using the machine
Warning label position 2
N Motor units inside machine
DON'T
TOUCH
N Fiducial camera
(Camera cover inner side)
DON'T
TOUCH
N Side-view camera
N Multi-vision camera
DO NOT TOUCH
53001-F1-00