Nordson_EFD_RV_Series_Operating_Manual.pdf - 第131页
RV Series Automated Dispensing Systems 131 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. # Click Step Reference Image 10 > • Jog th…
RV Series Automated Dispensing Systems
130 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
# Click Step Reference Image
6
>
• Click the PROGRAM tab, select an
empty Address line, then click PASTE.
The commands appear in the Program
screen.
7 • Click REFRESH next to the Secondary
View screen to show the imported
points and lines and make changes as
needed to the program.
The next step is to match the program
commands to the actual workpiece.
NOTES:
• After making any change to the
program, click REFRESH to update the
view in the Secondary View screen to
show the changes.
• You may need to zoom out to see the
points. This can be avoided by entering
offset values in the DXF screen Option
window. Refer to Option X, Y under
“Setting DXF Import Preferences” on
page128.
8
• Click TRANSFORM.
The Program and Table fields appear.
9 • Click on a point at the far left side of the
points shown in the Secondary View
screen, then click the top SET button
under Program.
Continued on next page
AppendixC, DXF File Import (continued)
Importing a DXF File (continued)
RV Series Automated Dispensing Systems
131www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
# Click Step Reference Image
10
>
• Jog the tip to the same point on the
actual workpiece and then click the top
SET button under Table.
11 • Click on a point at the far right side
of the points shown in the Secondary
View screen, then click the bottom SET
button under Program.
12
>
• Jog the tip to the same point on the
actual workpiece and then click the
bottom SET button under Table.
13 • Click CHANGE.
The system updates all XY locations in
the program so they align with same XY
locations on the actual workpiece.
Importing a DXF File (continued)
AppendixC, DXF File Import (continued)
RV Series Automated Dispensing Systems
132 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Using the Sort Path By Option
When importing a DXF file that includes an array of dots, you can use the Sort Path By option to choose how the dot
pattern is ordered upon import.
The DXF file imported for this example has the dispense dot array shown below.
# Click Step Reference Image
1
• Click DXF.
The DXF screen appears in the Primary
View screen.
2
> >
• Open the DXF file you want to convert
to a program.
The file appears in the Primary View
screen.
• Click SELECT ALL.
• Click OPTION.
The Option window opens.
3
• Select the SORT PATH checkbox to
enable the Sort Path By feature.
• Select the X or Y radio button to specify
the direction for the dots to be arrayed.
• Enter the number of dots in the array. In
this example, there are 160 dots.
NOTE: Refer to for “Examples of How
the Sort By Path Option Affects DXF
Imports” on page133 for diagrams of
the resulting import for each selection.
4
• Select OK.
The commands for the imported DXF
appear in the Program screen based on
the selected Sort Path By options.
AppendixC, DXF File Import (continued)