Schneller MTC Wechseltisch.pdf - 第37页
Special design Assembly instructions Changeover table in place of the MTC2 03/2007 Edition 37 : Click on “Y es” to start inst allation. 2 2 : The following windows appe ar while the inst allation, wait un til the final s…
Assembly instructions Changeover table in place of the MTC2 Special design
03/2007 Edition
36
: To make sure the registration information is correct, you are asked again. If it is correct, click
on “Yes” if not click on “No” and insert it correctly.
2
2
: Choose “Install SOKO” and click on “Next” to continue.
2
Special design Assembly instructions Changeover table in place of the MTC2
03/2007 Edition
37
: Click on “Yes” to start installation.
2
2
: The following windows appear while the installation, wait until the final screen appears which
says that the installation was completed successfully.
Click “Finish” and restart the machine afterwards to activate the new settings.
2
2
2
Assembly instructions Changeover table in place of the MTC2 Special design
03/2007 Edition
38
2
2
After restart the machine you can check on the GUI in the help menu --> Info the Software ver-
sion. 2
2