X-S Speicification.pdf - 第20页

20 Placement Heads Nozzle Changer Description Nozzle changers incr ease the flexibility of the placement heads when it comes to pro- cessing different compo- nents. The nozzle configuration can be rapidly adjusted to cha…

100%1 / 84
19
Placement Heads
SIPLACE TwinStar (TH)
SIPLACE TwinStar
Fine-pitch camera
(component camera type 33)
SIPLACE TwinStar
Flip chip camera (option)
(component camera type 25)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-specific stan-
dards, the component packaging tolerances and the component tolerances.
0402 to SO, PLCC, QFP, BGA, special
components, bare dies, flip-chips
0201 to SO, PLCC, QFP, sockets,
plugs, BGA, special components, bare
dies, flip-chips, shields
Component specs
b
Max. height
min. lead pitch
min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
c
b) If the MultiStar and TwinStar are combined in the same placement area, the maximum component height may be
restricted.
c) If standard nozzles are used
25 mm (higher available on request)
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 mm x 0.5 mm
55 mm x 45 mm (single measurement)
For use with two nozzles
50 mm x 50 mm or
69 mm x 10 mm
For use with one nozzle
85 mm x 85 mm or
125 mm x 10 mm
up to 200 mm x 125 mm (with restric-
tions)
100 g
25 mm (higher available on request)
0.25 mm
0.1 mm
0.14 mm
0.08 mm
0.6 mm x 0.3 mm
16 mm x 16 mm (single measurement)
55 mm x 55 mm (multiple measure-
ment)
100 g
Programmable set-down
force
1.0 N - 15 N
2.0 N - 30 N
d
d) SIPLACE High-Force Head.
1.0 N - 15 N
2.0 N - 30 N
d
Nozzle types
e
e) Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available online.
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
Gripper
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
Gripper
Nozzle spacing for P&P
heads
70.8 mm 70.8 mm
X/Y accuracy
f
f) The accuracy value, measured using the vendor-neutral IPC standard.
± 26 µm/3± 35 µm/4 ± 22 µm/3± 30 µm/4
Angular accuracy ± 0.05° / 3± 0.07°/ 4 ± 0.05° / 3± 0.07° / 4
Illumination level 6 6
Possible illumination
level settings
256
6
256
6
20
Placement Heads
Nozzle Changer
Description
Nozzle changers increase
the flexibility of the placement
heads when it comes to pro-
cessing different compo-
nents. The nozzle
configuration can be rapidly
adjusted to changing place-
ment jobs. Precisely defined
positions and perfect nozzle
seat in the garage ensure
minimum radial eccentricity
on the placement head.
The nozzle changers for the
MultiStar and the SpeedStar
are fitted with a monitoring
device. Which checks
whether the nozzle magazine
is seated correctly on the
mount. In addition, the nozzle
changers recognize whether
the magazines are for 1xx,
20xx or 28xx nozzles by the
code.
Nozzle changer for the SIPLACE MultiStar and SIPLACE
SpeedStar
Magazine for two
standard nozzles
Magazine for one special nozzle, gripper
Nozzle changer for the SIPLACE
TwinStar
1 magazine for 9 nozzles
of type 28xx
5 magazine for 12 nozzles of
type 20xx
3 magazines for 12 nozzles of
type 10xx, 11xx or 12xx
Nozzle changer for the SIPLACE SpeedStar
2 magazines for 12 nozzles of
type 10xx, 11xx or 12xx
1 magazine for 9 nozzles
of type 28xx
3 magazines for 12 nozzles
of type 20xx
21
Placement Heads
Nozzle Changer
Technical Data
Nozzle changer for the SIPLACE SpeedStar in the SIPLACE X3 S/X4 S
Dimensions (length x width x height) 449 mm x 94.5 mm x 79 mm
Number of magazines
a
Location 1 and 3:
b
Location 2 and 4:
a) All magazines in the nozzle changer must be configured.
b) For MTC with restrictions
6
6
Number of nozzle holders
Location 1 and 3:
Location 2 and 4:
72
72
Standard configuration 6 magazines with 72 nozzle garages
Option: Nozzle changer "row 2" 4 magazines with 48 nozzle garages
Nozzle types 10xx, 11xx, 12xx
Compressed air connection 0.45 MPa (4.5 bar)
Nozzle changer for the SIPLACE SpeedStar in the SIPLACE X4i S
Dimensions (length x width x height)
314 mm x 94.5 mm x 68.6 mm
Number of magazines
a
Location 1 and 3:
Location 2
b
and 4:
4
4
Number of nozzle holders
Location 1 and 3:
Location 2 and 4:
48
48
Standard configuration 4 magazines with 48 nozzle garages
Option: Nozzle changer "row 2" 4 magazines with 48 nozzle garages
Nozzle types 10xx, 11xx, 12xx
Compressed air connection 0.45 MPa (4.5 bar)
Nozzle changer for the SIPLACE MultiStar in the SIPLACE X3 S/X4 S
Dimensions (length x width x height) 449 mm x 62.7 mm x 77.7 mm
Number of magazines
a
Location 1 and 3:
Location 2
b
and 4:
6
6
Number of nozzle holders
Location 1 and 3:
Location 2 and 4:
72
72
Standard configuration 5 magazines with 60 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
Option: Nozzle changer "row 2" 4 magazines