X-S Speicification.pdf - 第44页
44 SIPLACE Software Suite General SIPLACE provides compre- hensive solution s based on modular software to ols for SMT machines, lines and production manageme nt: the SIPLACE software suite . Product definiti on, optimi-…
43
Machine Maintenance
We recommend that you
have your SIPLACE X-
Series serviced on a regular
basis to keep it in prime con-
dition during productive use.
The SIPLACE X-Series
Maintenance Manual con-
tains recommendations for
the maintenance intervals.
All maintenance tasks are
explained in detail with clear
diagrams.
The maintenance intervals
are weekly, 3 monthly (only
when the SIPLACE is config-
ured with a C&P20 head), 6
monthly and 12 monthly.
For simpler organization of
line maintenance during daily
production operations, the
degree of complexity is spec-
ified for each maintenance
task. These levels are minor
and major maintenance.
Minor Maintenance
Minor Maintenance includes
weekly maintenance tasks.
The tasks of the weekly
maintenance intervals can
be carried out using the
Maintenance Manual; thus
no special training is needed.
These tasks are typically
executed by the operating
personnel.
Minor Maintenance summa-
rizes all maintenance tasks
that are to be carried out on a
weekly basis. The average
time needed is approxi-
mately 1 hour per line,
depending on the line config-
uration as well as the number
of persons who carry out the
maintenance and their expe-
rience.
Major Maintenance
Major Maintenance summa-
rizes recommended mainte-
nance tasks with a higher
degree of complexity that are
usually carried out every 6 or
12 months. These tasks
require a special training.
Normally, these tasks are
carried out by adequately
trained operating, mainte-
nance or service personnel.
Major Maintenance tasks are
planned and carried out on a
6 and 12 month basis (3
month basis for C&P20
heads). Planning the Major
Maintenance is normally
connected to the planned
major maintenance of the
oven within the production
line.
44
SIPLACE Software Suite
General
SIPLACE provides compre-
hensive solutions based on
modular software tools for
SMT machines, lines and
production management: the
SIPLACE software suite.
Product definition, optimi-
zation and line control
Fast, fault-free introduction
of products and optimum uti-
lization of production lines
are essential to maximize
production output. The pro-
grams from the SIPLACE
software suite allow you to
easily program products,
fine-tune the programs you
have created and then find
the balance for them within
your SMT production lines.
Production monitoring &
process control
To achieve the production
targets that are set, it is
important to constantly moni-
tor and check the production
facilities. The SIPLACE soft-
ware suite contains monitor-
ing products tailored to suit
the user group. These signal
immediately if limits are
exceeded on the machine or
the production line.
Setup verification & trace-
ability
Setup errors lead to series
errors. The user-friendly
SIPLACE software programs
help you to avoid such
errors, and thus ensure high
quality in your electronics
production.
The benefits of the
SIPLACE software suite at
a glance:
• User-friendly
• Simple operation
• Fast programming and
error detection
• Reduces changeover
times and stoppages
• Ensures optimum utiliza-
tion of your production
line's productivity
• Real-time information
from the production area
• Incredibly fast distribution
of information
• Optimum use of resources
• Timely notification when
production materials need
to be re-ordered
• Coordination of mainte-
nance
45
SIPLACE Software Suite
Overview
Production monitoring:
SIPLACE Explorer
Product definition:
SIPLACE Pro
Station control:
SIPLACE station software with SMART GUI
SIPLACE software product Standard Option
Station operation and con-
trol
SIPLACE station software with SMART GUI X
Product definition, optimi-
zation and line control
SIPLACE Pro
One application for all programming tasks
X
SIPLACE ASCII Centroid Import Wizard
Fast and easy data conversion
X
SIPLACE SiCluster Professional
Fully automatic product grouping
X
SIPLACE EDM
Convenient data management for placement programs
X
Production monitoring &
process control
SIPLACE OIS
Operator Information System
X
SIPLACE Explorer
Line monitoring system
X
Setup verification & trace-
ability
SIPLACE Setup Center
Avoid setup errors with reliable setup verification
X
SIPLACE Traceability
Traceability of the placement processes
X
Station monitoring:
SIPLACE OIS