00198496-01_IM_OIB-Settings-EDM-Scenarios-R17-1_DE_EN.pdf - 第25页
EDM Scenarios and OIB Co nfiguration Island OIB Einstellungen - EDM Szenarien OIB Settings – EDM Scenarios 25 2.2 2 . 2 I s la n d Island Description In the factory, there is one SIPLACE Pro application for each p roduct…
EDM Scenarios and OIB Configuration
Central
24 OIB Einstellungen - EDM Szenarien OIB Settings – EDM Scenarios
2.1
2.1 Central
Central
Description
In the factory, there is only one SIPLACE Pro application. This is the Central configuration without EDM.
Configuration of the Services
▪The SIPLACE.Pro.SPI service must be assigned either to the Enterprise node or to „global/not con
-
figured“. It is also possible to configure this service for the site; however, this can only be done if there
is only one site in the Factory Layout.
▪The SIPLACE.Pro.LineControl services must be assigned to the work cell elements of the Lines.
Factory Layout in the EDM Scenario - Central
Example for the Factory Layout in the EDM Scenario - Central
1. SIPLACE.Pro.LineControl on the work cell element of the line (Line1)
2. SIPLACE.Pro.LineControl on the work cell element of the line (Line2)
3. SIPLACE.Pro.SPI service on the Enterprise node
NOTICE
Production Line
The Production Line object type comprises multiple work cell elements, for example, a work cell
element for the parking place, a work cell element for the picking place, and a work cell element
for the line. The individual stations are usually configured under the work cell element for the
lines. The SIPLACE.Pro.LineControl services must only be assigned to the work cell elements
of the lines.
EDM Scenarios and OIB Configuration
Island
OIB Einstellungen - EDM Szenarien OIB Settings – EDM Scenarios 25
2.2
2.2 Island
Island
Description
In the factory, there is one SIPLACE Pro application for each production line. No common SIPLACE Pro
application is installed as the master for all production lines. This is the Island EDM scenario.
Configuration of the Services
▪The SIPLACE.Pro.SPI services must be assigned to the Production Lines.
▪The SIPLACE.Pro.LineControl services must be assigned to the work cell elements of the Lines.
Factory Layout in the EDM Scenario - Island
Example for the Factory Layout in the EDM Scenario - Island
1. SIPLACE.Pro.LineControl on the work cell element of the line (Line 1)
2. SIPLACE.Pro.SPI on the production line (SMD 1)
3. SIPLACE.Pro.LineControl on the work cell element of the line (Line 2)
4. SIPLACE.Pro.SPI on the production line (SMD 2)
NOTICE
Production Line
The Production Line object type comprises multiple work cell elements, for example, a work cell
element for the parking place, a work cell element for the picking place, and a work cell element
for the line. The individual stations are usually configured under the work cell element for the
lines. The SIPLACE.Pro.LineControl services must only be assigned to the work cell elements
of the line.
EDM Scenarios and OIB Configuration
EDM
26 OIB Einstellungen - EDM Szenarien OIB Settings – EDM Scenarios
2.3
2.3 EDM
EDM
Description
In the factory, there is one EDM client SIPLACE Pro application for each production line. Additionally, a
common SIPLACE Pro application is installed as the master for all production lines. This is the EDM sce
-
nario.
Configuration of the Services
▪The SIPLACE.Pro.SPI service of the global SIPLACE Pro application must be assigned either to the
Enterprise node or to „global/not configured“. It is also possible to configure this service for the site;
however, this is only recommended if there is only one site in the Factory Layout.
▪The SIPLACE.Pro.SPI services of the lines must be assigned to the Production Lines.
▪The SIPLACE.Pro.LineControl services must be assigned to the work cell elements of the Lines.
NOTICE
Production Line
The Production Line object type comprises multiple work cell elements, for example, a work cell
element for the parking place, a work cell element for the picking place, and a work cell element
for the line. The individual stations are usually configured under the work cell element for the
lines. The SIPLACE.Pro.LineControl services must only be assigned to the work cell elements
of the line.