00198374-01_UG_OSC_Package_DE_EN.pdf - 第57页

4 Working with the OSC Features 4.2 Stereo Measurement for THT Pins Bedienungsanleitung OSC Package User Guide OSC-Paket - 06/2017 57 4.2.2 Application Example Step 1: SIPLACE Pro ► In the Station Editor under Placement …

4 Working with the OSC Features

4.2 Stereo Measurement for THT Pins

56 Bedienungsanleitung OSC Package User Guide OSC-Paket - 06/2017

4.2.1 Procedure

The following overview lists the single work steps that have to be performed in the specified order

to perform the stereo measurement when THT components are placed.

Performing Stereo Measurement

Step Action SIPLACE program

1) Enabling OSC package SIPLACE Pro

2) Setting component height (overall height or creep distance) –

Observing focus height

SIPLACE Pro

3) If a nozzle gripper is used, setting the nozzle height SIPLACE Pro

4) Enabling stereo measurement for THT pins SIPLACE Vision

5) If necessary, changing the traverse path in the stereo height

view

SIPLACE Vision

4 Working with the OSC Features

4.2 Stereo Measurement for THT Pins

Bedienungsanleitung OSC Package User Guide OSC-Paket - 06/2017 57

4.2.2 Application Example

Step 1: SIPLACE Pro

► In the Station Editor under Placement Station,

enable the OSC Package option under Installed

options.

In SIPLACE Pro the component height has to be set so that the THT pin tips are located in the

focal plane of the camera. In the focal plane, the THT pin tips are displayed most sharply, and the

measurement is most accurate. There are two options to do this:

Step 2: First option – SIPLACE Pro

Setting the component overall height (from the pin tips

to the component bottom).

► In the Component Shape Editor, set the

component overall height under Component

Shape – Form – Overall height (with pins).

Step 2: Second option – SIPLACE Pro

Setting creep distance = THT pin length

► In SIPLACE Pro Desk, set the creep distance =

THT pin length under Handling – Placement –

Creep Distance.

If you use a nozzle gripper, the nozzle height also has to be set.

4 Working with the OSC Features

4.2 Stereo Measurement for THT Pins

58 Bedienungsanleitung OSC Package User Guide OSC-Paket - 06/2017

Step 3: SIPLACE Pro

Setting parameters for the nozzle gripper

► In the Nozzle Editor, disable the Height check

height reference run under Custom Nozzle –

Advanced Data.

► Set the Nominal length from the nozzle bottom to

the component touchdown point under Nozzle

dimensions.

Step 4: SIPLACE Vision

► Enable the Stereo Measurement option in the

Component shape wizard in the Meas. options.