161页面.pdf - 第158页
Univ e rs al acces s o r ies S VC-T3 Padl ocki ng fea ture, f ront I P65 The locking slide can be locked with a maximum of 3 padlocks when in its pressed, interlocked position Descripti on W ithdrawabilit y Part number A…
Universal accessories
S-T0 key operated lock mechanism, with two keys, front IP53
The key replaces the thumb grip, cannot be switched without key. The switch position indication is on the lock. Normally the key is
withdrawable in every position.
On Cam switches ordered with front plate FS908 together with key operation, the key is only withdrawable in the 0 position.
The key withdraw can be changed (also retrospectively) with the locking cam ‘VR-T0’
When retrofitting the key operation, the existing front plate of the cam switch can be used
Description Withdrawability Part number
Article
number
Std.
pack Suitable for
KMS 1 lock mechanism: individual lock mechanism,
not suitable for master key systems.
Key withdrawable in all positions
Withdrawable
positions can be
programmed by user
S-T0 086709 1
Flush mounting /E: T0-1 to T0-6, T3-1 to T3-5, P1
Surface mounting /I1: T0-1 to T0-4
Surface mounting /I2: T3-1 to T3-4 , P1
Rear mounting /Z: T0-1 to T0-6, T3-1 to T3-4, P1
KMS-2-10, KMS 201-400 lock mechanisms:
individual lock mechanisms, not suitable for master
key systems.
Key withdrawable in all positions
Withdrawable
positions can be
programmed by user
S-SOND-KMS(*)-TO 231957 1
Lock KMS1 switches with FS908 are possible as
main switch.Key can be withdrawn in positions as
specified.
Withdrawable
positions programmed
at factory as ordered
S(*)-T0 231959 1
SA(...) = master key system (master-key facility) with
security certificate. Ordering only with lock plan
filled out with the full configuration of the planned
lock system.
When reordering state item number from the lock
plan, e.g. (A 6294-1.2).
Key can be withdrawn in positions as specified.
Withdrawable
positions programmed
at factory as ordered
S(*)-SOND-SA(*)-T0 231965 1
086709
SVA-T3 Cylinder lock, with two keys, front IP65
Description Withdrawability Part number
Article
number
Std.
pack Suitable for
KMS 1 lock mechanism: individual lock mechanism,
not suitable for master key systems.
Key withdrawable in all positions
Withdrawable positions can be
programmed by user
SVA-T3 050974 1
Flush mounting /E: T0, T3, P1
Surface mounting /I1: T0
Surface mounting /I2: T3, P1
Rear mounting /Z: T0, T3, P1
KMS-2-10, KMS 201-400 lock mechanisms:
individual lock mechanisms, not suitable for master
key systems.
Key withdrawable in all positions
Withdrawable positions can be
programmed by user
SVA-SOND-KMS(*)-T3 231967 1
Lock KMS1 switches with FS908 are possible as
main switch.Key can be withdrawn in positions as
specified.
Withdrawable positions
programmed at factory as
ordered
SVA(*)-T3 907745 1
Flush mounting /E: T0-1 to T0-4
T3-1 to T3-6, P1
Surface mounting /I1: T0-1 to T0-4
Surface mounting /I2: T3, P1
SA(...) = master key system (master-key facility) with
security certificate. Ordering only with lock plan
filled out with the full configuration of the planned
lock system.
When reordering state item number from the lock
plan, e.g. (A 6294-1.2).
Key can be withdrawn in positions as specified.
Withdrawable positions
programmed at factory as
ordered
SVA(*)-SOND-SA(*)-T3 231971 1
Photos are representative
050974
157EATON P Switch-disconnectors and T Rotary cam switches CA042001EN
Universal accessories
SVC-T3 Padlocking feature, front IP65
The locking slide can be locked with a maximum of 3 padlocks when in its pressed, interlocked position
Description Withdrawability Part number
Article
number
Std.
pack Mounting form Suitable for
All positions can be locked The positions that can be
locked can be programmed by
the user
SVC-T3 050975 1
Flush mounting /E T0, T3, P1
Surface mounting /I1 T0
Suface mounting /I2 T3, P1
Rear mounting /Z T0, T3, P1
Specific positions or ranges can
be locked
The positions that can be
locked are programmable at
the factory as ordered
SVC(*)-T3 907748 1
Switches with FS908 front plate can be used as main switches
for:
Flush mounting /E T0-1 to T0-4, T3-1 to T3-5, P1
Surface mounting /I1 T0-1 to T0-4
Suface mounting /I2 T3-1 to T3-5, P1
Key
Description Part number
Article
number
Std.
pack
For KMS 1 individual lock mechanism ES-KMS1-T0 231972 10
For KMS 2-10 or KMS 201-400 individual lock mechanisms ES-KMS(*)-T0 231973 1
Individual key, stainless, for master key system and stored individual lock mechanisms,
state lock plan no. and key
Master key must be ordered separately.
The security certificate must be sent when reordering for example: HS-SA(A6294-1-.2)-T0
HS-SA(*)-T0 256151 1
Locking cams (2 cams per set)
Description Part number
Article
number
Std.
pack
Suitable for
export to
North America
(US and
Canada) Suitable for
For later change of key withdrawability in
the engagements positions
VR-T0 089082 1
S-T0 for all switching angles
For changing the blocked positions/
ranges
VR-T3 050987 1
SVA-T3, SVC-T3
089082
050987
Photos are representative
907748
158
EATON P Switch-disconnectors and T Rotary cam switches CA042001EN
Universal accessories
P1 and P 3 Neutral terminal
•
Early make on switching, late-break off switching
•
The N contact always behaves as an early-make contact when switching on and as a late-break contact for when switching off.
•
N-P1(P3)...switching capacity same as for contacts P1(P3)
Description Part number
Article
number
Std.
pack
Suitable for
export to
North America
(US and
Canada) Suitable for Mounting
For left or right side mounting N-P1E 000651 5
P1 Flush mounting /E
Centre mounting /EZ
For P1.../I2 optionally,
NP1Z or HI11-P1/P3Z, can only
be fitted on the left
N-P1Z 000652 5
P1 Surface mounting /I2
Rear mounting /Z
Service distribution
board/ IVS
N-P3E 062432 5
P3 Flush mounting /E
N-P3Z 064805 5
P3 Rear mounting /Z
Service distribution board
/IVS
P3-63 Surface mounting /I4
Rear mounting /Z
P3-100 Surface mounting /I5
Rear mounting /Z
P5 Neutral terminal
•
Front mounting, left
•
Service distribution board mounting right
Description Part number
Article
number
Std.
pack
Suitable for
export to
North America
(US and
Canada) Suitable for Mounting
Neutral terminal N-P5-125/160E 280969 1
X P5-125 and 160 Flush mounting /EA
N-P5-125/160Z 280970 1
X P5-125 and 160 Rear mounting /V
N-P5-250/315E 280971 1
X P5-250 and 315 Flush mounting /EA
N-P5-250/315Z 280972 1
X P5-250 and 315 Rear mounting /V
P5 Ground terminal
•
Front mounting, right
•
Service distribution board mounting left
Description Part number
Article
number
Std.
pack
Suitable for
export to
North America
(US and
Canada) Suitable for Mounting
Ground terminal PE-P5-125/160E 280973 1
X P5-125 and 160 Flush mounting /EA
PE-P5-125/160Z 280974 1
X P5-125 and 160 Rear mounting /V
PE-P5-250/315E 280975 1
X P5-250 and 315 Flush mounting /EA
PE-P5-250/315Z 280976 1
X P5-250 and 315 Rear mounting /V
P1 Switch terminals
•
For use with P1 Switch terminals and additional terminals such as auxiliary and neutral units
Description Part number
Article
number
Std.
pack
Suitable for
export to
North America
(US and
Canada) Suitable for Mounting
Fork terminal FORKTERM-P1 400136 8
X P1 All mounting options
000652
Photos are representative
280969
280974
159EATON P Switch-disconnectors and T Rotary cam switches CA042001EN