205020 OTS Standalone Manual.pdf - 第23页
OVER THE TOP SNUGGER (O TS) ELECTRICAL SCHEMATIC Chapter Issue 3 Aug 14 Over the Top Snuggers (OTS ) Manual 1.11 ELECTR ICAL SCH EMA T IC Figure 1-3 OTS Schematic Mid P l ate Up (8 SO L 10 ) OTS So len o id Bank I O No d…
OVER THE TOP SNUGGER (OTS)
OTS CONTROL RAIL
1.10 Over the Top Snuggers (OTS) Manual Chapter Issue 3 Aug 14
Pneumatic
Regulators
Three pneumatic regulators are employed to regulate the pressure for the
following functionality:
• Over top cylinder extend
• Over top cylinder retract
• Mid plate balance
OTC horizontal movements are controlled by the two over top regulators; see
the Sequences section of this manual for details. The mid plate balance valve
provides sufficient upward lift to hold the mid plate weight. All three regulators
are factory set to achieve the optimum response for the operation.
IO Node 5 (OTS
and HTC)
Node 5 provides the electrical connection to the solenoids, CAN Bus and the
ITV valves.
NODE 5 OTS & HTC BOARD
198769 ISSUE
N5SK9
N5SK11
N5SK7
N5PL2
N5PL3
N5SK6
N5SK10
N5SK8
N5SK5
N5SK3
N5PL14
N5SK2
N5SK1
N5SK12
N5PL1
N5SK4
Connector Description
N5PL1 +12/+24V Power Input
N5PL2 CAN In
N5PL3 CAN Out (to screen cleaner, if fitted)
N5PL6 Digital Out 0-5 ~ OTS Solenoid Bank
N5PL10 Analogue ~ Snugging and Clamp Pressure Regulators
OVER THE TOP SNUGGER (OTS)
ELECTRICAL SCHEMATIC
Chapter Issue 3 Aug 14 Over the Top Snuggers (OTS) Manual 1.11
ELECTRICAL SCHEMATIC
Figure 1-3 OTS Schematic
Mid Plate Up
(8SOL10)
OTS Solenoid Bank
IO Node 5
Node Power
M36 Control Enclosure
NextMove ES
(IO Node 1)
Mid Plate Down
(8SOL11)
Over Top Plate Retract
(8SOL12)
CAN In
CAN Out
(Screen
Cleaner
if Fitted)
Top Plate Up
(8SOL13)
Vacuum
(8SOL14)
Snugger
& Brake
(8SOL15)
Clamp Pressure
Regulator
Snugging
Pressure
Regulator
OVER THE TOP SNUGGER (OTS)
PNEUMATIC SCHEMATIC
1.12 Over the Top Snuggers (OTS) Manual Chapter Issue 3 Aug 14
PNEUMATIC SCHEMATIC
Figure 1-4 OTS Pneumatic Schematic
Top Plate
Cylinder
Over Top
Cylinder
Over Top
Cylinder
Clamp
Pressure
ITV
Mid Plate
Cylinder
Mid Plate
Cylinder
Out
Out
In
In
Top Plate
Cylinder
Brakes
Note
This circuit represents one clamp only.
Full details available in Electrical Drawings
Man al
VAC Generator
Snugger
Cylinder
Snugger
Pressure
ITV
Valve 6
Snug & Brake
Valve 5
Vacuum
Valve 4
Top Plate
Up/Down
Valve 3
Overtop
Clamp
Extend/Retract
Valve 2
Mid Plate
Down
Valve 1
Mid Plate
Up
ance V
alve
Clamp Pressure
On/Off