ISM-1100_INM.pdf - 第16页
Quick reference handbook Barcode Reader software Quick reference handbook Barcode Reader software rev_6 Edition 06/2017 - Reproduction forbidden Page 16 Rules To decide which barcode the camera has to read, you can use t…
Quick reference handbook Barcode Reader software
Quick reference handbook Barcode Reader software rev_6 Edition 06/2017 - Reproduction
forbidden
Page 15
In identification area, you will find 15” A if you access by clicking the “15
configuration” button.
When you draw the 15” reel area, you have to select the whole area of the 15”
reel.
To check if the parameters are corrected, click and “Find configured codes in
selected area” button.
Quick reference handbook Barcode Reader software
Quick reference handbook Barcode Reader software rev_6 Edition 06/2017 - Reproduction
forbidden
Page 16
Rules
To decide which barcode the camera has to read, you can use the Rules setting
window to specify:
- barcode types
- any configuration in terms of length, type of digits, prefix, suffix, etc. and
any other rules to prevent the reading of a not desired code
You can create a new rule to read a code. It is possible to create a rule for each
code to read especially in Auto-incoming mode which is an option to activate into
the license (if this option has been purchased by the customer).
The option “Auto-incoming” is activated when the customer has an only one 2D
code (or more 1D codes) which contains more information (Unique code, item,
quantity etc.).
We would like kindly to remind that before making the Auto-incoming procedure,
it is necessary to check if this pay option has been activated into the license and
the userconf file.
This button allows you to cancel a rule created previously. If you do not like to
delete the rule but you want only to disable it, you can remove the flag on the
checkbox “Rule enabled” to disable it.
You can move up or down the rule just created. In case of a very long code
composed by more information, you can decide which information the barcode
reader can search first moving the rule above.
Quick reference handbook Barcode Reader software
Quick reference handbook Barcode Reader software rev_6 Edition 06/2017 - Reproduction
forbidden
Page 17
There is the possibility to export or import created rules or delete them. If you
create a rule, you can choose the network path where saving the file called
rules.dat.
When you create a rule, you have to fill in the following fields:
- Name field: you have to type a name for the rule you are creating.
- Rule type: you can associate the rule to a specific information included into the
following drop-down menu.
- Code type: you have to select the type of code to read by the following drop-
down menu.
- Pattern match: this is a regular expression to validate the barcodes found.
A technician can create by himself the regular expression and in case of need,
Storage Solution customer service department is always available.