TS5624DMP-User-Guide.pdf - 第12页

12 12. LIMITED WARRANTY Manufacturer warrants this product to the original purchaser for a period of one (1) year from date of pu rchase to be free fro m defects in material and workmanship, but not against damages by mi…

10. ACCESSORIES

10.1 FLUID FITTINGS AND TUBING

10.2 BRACKETS

PART NUMBER

DESCRIPTION

TS918-46

4-Way Fluid Manifold

TN00DKIT

Complete Dispensing Tip Kit

9000-000-100

Sample Tip Kit

PART NUMBER

DESCRIPTION

TSD1003-16

⅛'' NPT to ¼'' O.D. Tube, 90° Elbow

TSD1002-17

⅛'' NPT to ⅜'' O.D. Tube

TSD1002-18

⅛'' NPT to ¼'' O.D. Tube

TSD1002-38

¼'' NPT to ¼'' O.D. Tube

TSD1099-22

⅜'' O.D. X ¼'' I.D. Tube, Black, Polyethylene

TSD1099-23

⅜'' O.D. X ¼'' I.D. Tube, Clear, Polyethylene

TSD1099-24

¼'' O.D. X ⅛'' I.D. Tube, Clear, Polyethylene

TSD1099-25

¼'' O.D. X ⅛'' I.D. Tube, Black, Polyethylene

TSD1099-45

6mm O.D. X 4mm I.D, Clear, Polyethylene

TSD1099-46

6mm O.D. X 4mm I.D, Black, Polyethylene

TSD126-360BPK

Luer Lock Tubing, 60'' (1524mm) , Black

PART NUMBER

DESCRIPTION

918-033-000

Productions Master Stand (Base & Support)

918-000-012

Rod Clamp Assembly

5620-000-008

4'' (101.6mm) Threaded Mounting Rod

7509-9100

Syringe Bracket With Inserts

11. TROUBLE SHOOTING

PROBLEM

POSSIBLE CAUSE

CORRECTION

No fluid flow

Fluid pressure too low

Increase fluid pressure

Operating pressure too low

Increase air pressure to 70 psi

(4.8bar)

Dispense tip clogged

Replace tip

Fluid cured in valve chamber

Replace material path

Stroke adjustment closed

Open stroke adjustment

counterclockwise

Inconsistent

fluid flow

Fluid pressure fluctuating

Ensure fluid pressure is

constant

Valve operating pressure is too

low

Increase valve pressure to 70

psi (4.8bar)

Valve open time is not

consistent

Check to make sure the valve

controller is providing a

consistent output

Air trapped in fluid housing

Purge valve

Fluid drools after

the valve closes,

eventually

stopping

Air trapped in fluid chamber

Purge valve

Steady drip

Worn material path

Replace material path

Fluid pressure exceeds 60 psi

(4.1bar)

Lower fluid pressure

12. LIMITED WARRANTY

Manufacturer warrants this product to the original purchaser for a period of one (1)

year from date of purchase to be free from defects in material and workmanship,

but not against damages by misuse, negligence, accident, faulty installations and

instructions. Manufacturer will repair or replace (at factory’s option), free of

charge, any component of the equipment thus found to be defective, on return of

the component, “PREPAID” to the factory during the warranty period. In no event

shall any liability or obligation of the Manufacturer arising from this warranty

exceed the purchase price of the equipment. This warranty is only valid if the

defective product is returned as a complete assembly without physical damage.

The Manufacturer’s liability, as stated herein, cannot be altered or enlarged except

by a written statement signed by an officer of the company. In no event shall the

Manufacturer be liable for consequential or incidental damages. A return

authorization is required from Techcon Systems prior to shipping a defective unit

to the factory.

Manufacturer reserves the right to make engineering product modifications

without notice.

All returns must be issued with a Returns Authorization number, prior to return.

Send warranty returns to:

Americas and Asia

OK International

Garden Grove Division

12151 Monarch Street

Garden Grove, Ca 92841

Europe

OK International

Eagle Close

Chandler’s Ford Ind Est

Eastleigh

Hampshire

SO53 4NF

United Kingdom

www.techconsystems.com

7000-4760_A