TS5624DMP-User-Guide.pdf - 第9页
9 9. SPARE PARTS ITEM PART NUMBER DESCRIPTION 1 5620-000-004 End Cap 2 TSD1400-111A PK End Cap O-Ring (Pack of 10) 3 2800-0892 Washer, SS 4 3300-0578 Spring 5 TSD1120- 11 Retaining Ring 6 TSD1109- 43 Mylar Washer 7 5620-…
8
8. MAINTENANCE OF AIR CYLINDER O-RING (Refer to figure 7.0 and 8.0)
1. Unscrew receiver screws (1).
2. Remove the DMP (2).
3. Remove the stroke control knob (3) and spring (4).
4. Remove the receiver assembly (5).
5. Remover actuator (6).
6. Remove retaining ring (7), anti-rotate washer (8) and Mylar washer (9).
7. Remove piston (10) from air cylinder (11).
8. Replace O-ring (12) if damaged; otherwise lubricate O-ring with Bimba
HT-99, or equivalent.
9. Reinstall piston (10), retaining ring (7), anti-rotate washer (8) and Mylar
washer (9).
10. Reinstall actuator (6) as per position in Step 4. 90° offset to the air inlet.
11. Reinstall receiver assembly (5), leaving receiver screws loose.
12. Reinstall spring (4) and stroke control knob (3).
13. Install DMP (2) and set torque on receiver screws. - 14 in lb. (1.58 N-m)
Vertical slot must
face this way, 90°
offset to the air inlet.
Step 1
Figure 7.0
(12)
(10)
(1)
(2)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(10)
(11)
(9)
Step 2
Step 3
Step 6
Step 5
Step 4
9
9. SPARE PARTS
ITEM
PART NUMBER
DESCRIPTION
1
5620-000-004
End Cap
2
TSD1400-111APK
End Cap O-Ring (Pack of 10)
3
2800-0892
Washer, SS
4
3300-0578
Spring
5
TSD1120-11
Retaining Ring
6
TSD1109-43
Mylar Washer
7
5620-000-006
Anti-Rotate Washer
8
TSD1400-016APK
Piston O-Ring (Pack of 10)
9
5620-000-005
Piston
10
5620-000-003
Air Cylinder
11
A0100478
Air Hose/Connector Assembly, 4mm
12
TSD1003-20
Air Fitting, 4mm, Elbow
13
7509-0250
Actuator
14
7509-0270
Upper Receiver
15
2800-0463
Upper Receiver Screw
16
7509-0280
Lower Receiver
17
2800-0236
Washer
18
2800-0886
Screw
19
DMP-5624
Disposable Material Path (Pack of 10)
20
TSD1106-13
Mounting Screw
21
918-000-048
Mounting Bracket
22
7509-9100
Syringe Bracket W/Inserts (See Fig.5)
Lubrication: All O-Rings must be lubricated with Bimba HT-99, or equivalent.
Receiver Mounting Screws Torque (Item 18): 14 in lb. (1.58 N-m).
Figure 8.0
10
10. ACCESSORIES
10.1 FLUID FITTINGS AND TUBING
10.2 BRACKETS
PART NUMBER
DESCRIPTION
TS918-46
4-Way Fluid Manifold
TN00DKIT
Complete Dispensing Tip Kit
9000-000-100
Sample Tip Kit
PART NUMBER
DESCRIPTION
TSD1003-16
⅛'' NPT to ¼'' O.D. Tube, 90° Elbow
TSD1002-17
⅛'' NPT to ⅜'' O.D. Tube
TSD1002-18
⅛'' NPT to ¼'' O.D. Tube
TSD1002-38
¼'' NPT to ¼'' O.D. Tube
TSD1099-22
⅜'' O.D. X ¼'' I.D. Tube, Black, Polyethylene
TSD1099-23
⅜'' O.D. X ¼'' I.D. Tube, Clear, Polyethylene
TSD1099-24
¼'' O.D. X ⅛'' I.D. Tube, Clear, Polyethylene
TSD1099-25
¼'' O.D. X ⅛'' I.D. Tube, Black, Polyethylene
TSD1099-45
6mm O.D. X 4mm I.D, Clear, Polyethylene
TSD1099-46
6mm O.D. X 4mm I.D, Black, Polyethylene
TSD126-360BPK
Luer Lock Tubing, 60'' (1524mm) , Black
PART NUMBER
DESCRIPTION
918-033-000
Productions Master Stand (Base & Support)
918-000-012
Rod Clamp Assembly
5620-000-008
4'' (101.6mm) Threaded Mounting Rod
7509-9100
Syringe Bracket With Inserts