00198832-01_VD_SSW_714.0_R20-2_EN_DE.pdf - 第25页
Station Software 714.0 (R20-2) / Version Description 11/2020 Edition 25 8 Corrected Errors 71 4.0 Station Software The 714.0 station software version contains all error correctio ns of the previous 7xx versio ns. Additio…
Station Software 714.0 (R20-2) / Version Description 11/2020 Edition
24
7 Restrictions
For details concerning possible machine configurations, please consult the latest version of the
machine specification.
Restrictions to features in previous versions can be found in the Station Software V7xx Feature
Description, item no. [00197741-xx].
Station Software 714.0 (R20-2) / Version Description 11/2020 Edition
25
8 Corrected Errors
714.0 Station Software
The 714.0 station software version contains all error corrections of the previous 7xx versions.
Additionally, the following errors have been corrected in this version:
Error no.
Error description
G50033887
Possible crash while lane is blocked.
883_C_150520
Improvement of PRV calibration.
G50082350
Robustness eSW download.
G50098325
X4is error reason of MES not displayed on station.
G50102174
Reset data does not reset all necessary information.
T01252979
Reduce CPU usage of GUI during image acquisition (i.e. tray teaching).
T01183843
Calibration tool handling at "fast hardware exchange".
G50056864
FCU temperature error / sub-system does not answer.
G50073177
Traceability data lost during Auto Recovery.
G50098679
Data is not saved after teaching the PCB corner.
Table 8-1: Corrected errors station software version 714.0
Station Software 714.0 (R20-2) / Version Description 11/2020 Edition
26
9 Important Terms and Abbreviations
CA4
CA4 V2
Machine type of the Chip Assembly (CA)-series with 4 gantries
and 2 PAs
C&P
Collect & Place
CPP
Collect & Place & Pick & Place
DC
Dual Conveyor
DX1/DX2
Machine type with 1 or 2 gantries and 1 PA
DX4
Machine type with 4 gantries and 2 PAs
E1 L
E1 R
Machine type with 1 gantry and 1 PA
EDIF
Electronic Design Interchange Format
eWLP
embedded Wafer Level Process
FOPLP
Fan-Out Panel Level Packaging
FCCS
Field Camera Calibration System
GUI
Graphical User Interface
HFH
High Force Head
HW
Hardware
MGCU
Modular Gantry Control Unit
MHCU
Modular Head Control Unit
MTC
Matrix Tray Changer
OIS
Operator Information System
PA
Processing area
PCB
Printed circuit board
Placement mode:
2-in-1
When a machine runs in I-Placement mode, it is possible to
perform manual operations for one side / gantry. This placement
mode is also called "independent".
Placement mode:
Alternating
Placement mode in a dual gantry placement area, in which both
gantries place components on both boards in a dual conveyor.
First, both gantries place all assigned components on the board
in lane one and then on the board in lane two.
Placement mode:
Borrow
Performance
A line runs in I-Placement mode and to get a balanced
throughput between the left and right conveyor lanes, e.g. the
last machine runs in Alternating mode and places components in
this placement area on the board of the other lane.
Placement mode:
I-Placement
Placement mode in a dual gantry placement area in which each
gantry only places components on the board of the assigned
conveyor lane.
SC
Single Conveyor
SC
SIPLACE Setup Center (external setup control system)
SW
Software
SWS
SIPLACE Wafer System