SOM-1740-001.pdf - 第14页

13 Tg0934-PM-SO 0310-001-(M696JSC-A1004) 7. Materials UA54(H1) Layout of Amplifier Unit Layout of Sensor Section Light Receiving Side Disengaged Feeder Latch Detection (F12 Side) Disengaged Feeder Latch Detection (F34 Si…

100%1 / 19
12 Tg0934-PM-SO0310-001
13 Tg0934-PM-SO0310-001-(M696JSC-A1004)
7. Materials
UA54(H1)
Layout of Amplifier Unit
Layout of Sensor Section
Light Receiving Side
Disengaged Feeder Latch Detection (F12 Side)
Disengaged Feeder Latch Detection (F34 Side)
Feeder Installation Error Detection (F12 Side)
Feeder Installation Error Detection (F34 Side)
Nozzle Lower Limit Error
Nozzle Level Detection
Unrequired Nozzle #1
Unrequired Nozzle #2
Cutter Forward Limit
Cutter Backward Limit
Tape End Detection
Nozzle Change / Return
Pick-Up Miss Check A
Pick-Up Miss Check B
Air Pressure Drop Detection
Nozzle Change/Return Stopper
Lifted Feeder Prevention Detection (F12 Side)
Lifted Feeder Prevention Detection (F34 Side)
Symbol SymbolSymbolName Name Name
-marked area is specially specified.
Note
7. Materials
7.1 Layout of Sensors and Loads
Layout of Sensors and Loads (Rear Side of Main Machine)
14 Tg0934-PM-SO0310-001-(M696WD--A1003)
7.2 Electrical Circuit Diagram
7.2 Electrical Circuit Diagram
I/O Board H1 1/2
Note
Placement Interlock
Cam Phase Check A
Cam Phase Check B
Rotary Turret Wheel
Handle Check
Low Nozzle Detection
Nozzle Lower Limit
Error
Nozzle Level Detection
Unrequired Nozzle 1
Unrequired Nozzle 2
Bad Mark Detection
Nozzle Change
Nozzle Change/Return
Cutter Forward
Movement Check
Cutter Backward
Movement Check
Head No. Detection 1
Head No. Detection 2
Head No. Detection 3
Head No. Detection 4
Pick-Up Miss Check A
Pick-Up Miss Check B
Sensors in Slip Ring Section
Note (c)
Note (c)
Note (a)
Note (b) Integrated power line
Rotary Switch
Amplifier
Shield Core Cable
Operation
Selector
Timer
Sensor
Note (a)
(c) Connect connectors so that the drain line is connected to terminal 9 of the connector and the shield section is connected to the connector body for grounding respectively.
(d)
-marked area is specially specified.