SOM-1740-001.pdf - 第7页
6 Tg0934-PM-SO 3.2 Bulk Feeder 0310-001 3.2 Bulk Feeder Fig. 2 58.5 2.5 7 37 Feeder Carriage Movement Direction Pick-up Error Confirmation Plate A Pick-up Center Pick-up Error Confirmation Sensor A Pick-up Error Confirma…
5 Tg0934-PM-SO
3. Sketch Drawing
3.1 Tape Feeder with width of 8 to 44 mm
0310-001
3. Sketch Drawing
Fig. 1
26
20
7
4
17
37
2.558.5
Pick-up Error
Confirmation
Sensor A
Nozzle Detection Sensor
Feeder Carriage
Movement Direction
Pick-up Error Confirmation Plate A
Pick-up Center
Pick-up Error
Confirmation
Sensor B
Pick-up Error Confirmation Plate B
Line Sensor
Upper Cutter
Blade (Flat Type)
Component
Vacuum Nozzle
Tape Feeding Direction
Cutter Unit
6 Tg0934-PM-SO
3.2 Bulk Feeder
0310-001
3.2 Bulk Feeder
Fig. 2
58.5 2.5
7
37
Feeder Carriage
Movement Direction
Pick-up Error Confirmation Plate A
Pick-up Center
Pick-up Error
Confirmation Sensor A
Pick-up Error
Confirmation Sensor B
Pick-up Error Confirmation Plate B
Tape Feeding Direction
Upper Cutter Blade
(Flat Type)
Component
Vacuum Nozzle
Bulk Feeder
Cutter Unit
7 Tg0934-PM-SO0310-001
4. Operation Description
4. Operation Description
(1) Turn on the power to the machine.
Refer to "Volume 1, Section 3 Scope of Automatic Operation" for
details.
(2) If an error occurs when the vacuum nozzle picks up a component
from the tape feeder then the component will be caught between
the tape feeding surface of the tape feeder and the suppressor
(vertical component).
(3) After the feeder carriage is moved, the pick-up error confirmation
plate A or B, will touch the error component and detect the error.
(4) The feeder carriage will be stopped immediately and the cycle op-
eration of the turn-table is also stopped.
Refer to "6. Trouble Shooting" for how to restore.
Note