00193732-02.pdf - 第65页
SIPLACE HS-50/HS-60 2 Retrofit Instructions for PCB Camera Mult icolor, HS-50 / HS-60 11/2004 Edition 2.8 Configuration PCB C amera Multicolor o n LC 65 2.7.5 Assembl ing the Plac ement Head a nd the Machine : Pl ace the…
2 Retrofit Instructions for PCB Camera Multicolor, HS-50 / HS-60 SIPLACE HS-50/HS-60
2.7 Installing PCB Camera Board and PCB Camera Multicolor 11/2004 Edition
64
2.7.4 Laying Cables, Plugging into PCB Camera Board and Vision Board
: Run the two cables from the PCB camera Multicolor up to the head PCBs.
: Plug the connectors of the PCB camera Multicolor into the "Vision board modular" and into the
"PCB camera, modular" located above it.
2
2
: Fasten the cables running upward such that the strain on the connectors is relieved.
: Fasten the flat ribbon cables.
2
2
2
2
2
2
2
2
2
Plug the
camera cable
SIPLACE HS-50/HS-60 2 Retrofit Instructions for PCB Camera Multicolor, HS-50 / HS-60
11/2004 Edition 2.8 Configuration PCB Camera Multicolor on LC
65
2.7.5 Assembling the Placement Head and the Machine
: Place the covers previously removed back on the placement heads and screw them.
: Place the covers on to cable pits.
: Re-install the servo unit (socket hex head cap screw M5).
: Apply screw-locking compound to the screw.
: Remove all of the tools, etc., from the machine’s working area.
: Before docking the movable component changeover table, push the gantry until it is over the
PCB conveyor area.
: Place the side panel of the machine frame and secure it (with a total of 6 screws).
: Install the head crash protections over the component changeover tables.
: Dock all movable component changeover tables with the previous allocation.
: Lock the doors of the machine frame.
: Close the safety doors and safety hoods.
: Turn the machine on at the main switch. The compressed air must be on.
: Resume the work with the configuration at the line computer.
2.8 Configuration PCB Camera Multicolor on LC
The software version 502.01 or later is a prerequisite for using the PCB camera Multicolor. 2
The optional PCB camera Multicolor is selected in the station configurator of the UNIX line com-
puter (LC). Insofar as this operation is concerned it can occur before or after the PCB camera Mul-
ticolor is selected at the station in question, in the SITEST program 502.xx. 2
2
: In the menu bar at the top, select "Services".
: In the pull-down menu that opens, select the option:
"Station configuration".
: The window from which the machine is selected opens:
Select the machine on which the optional PCB camera Multicolor was installed.
2
2
2
2 Retrofit Instructions for PCB Camera Multicolor, HS-50 / HS-60 SIPLACE HS-50/HS-60
2.8 Configuration PCB Camera Multicolor on LC 11/2004 Edition
66
: The "Main view of "Structure editor" is displayed automatically.
As shown afterwards, the selected machine is displayed graphically, arranged by gantries, and
with the pertinent substructures (component feeding areas, placement heads, PCB cameras,
options, etc.).
Abb. 2.8.1 Structural Overview
: The field "PCB camera Multicolor" is deactivated. Activate the optional PCB camera Multicolor
with a double click on "LP PC_cam _18", as illustrated above.
: Do this for all 4 gantries.
: In the menu bar at top, in the Station Editor, select "File" -> "Save" - END".
: Then select: "File" -> "Data manager".
: Double click on the ICONs for "Master data".
: In the window that opens, double click on "Stations".
: Click once on the "Double click" field that opens and click once on "Compiler" to select it.
: Select with a double click the pertinent station at which the PCB camera Multicolor is used /
was retrofitted.