00198158-01_AI_Speed_Config_RV12_NC_EN.pdf - 第18页
Speed (Single-Sided) DLM-RV12 - Option 1 Installation Procedures 18 Assembly Instructions E by SIPLACE ► Connect the diameter 6 mm tube "T ube Nozzle Changer LOC1" [03102 149 - xx] to port 3 of the air service …
Speed (Single-Sided) DLM-RV12 - Option 1
Installation Procedures
Assembly Instructions E by SIPLACE 17
► Connect the cable [03102710
-
xx] to the cable of the nozzle changer "NC single row for DLM4 RV6/
12, C&P14 P" [03106322
-
xx].
► Mount the nozzle changer onto the shim covers on both ends and secure it with four M5x14 cap
screws.
► Assemble the active nozzle magazines.
► Remove the yellow covers shown.
Speed (Single-Sided) DLM-RV12 - Option 1
Installation Procedures
18 Assembly Instructions E by SIPLACE
► Connect the diameter 6 mm tube "Tube Nozzle Changer LOC1" [03102149
-
xx] to port 3 of the air
service unit located in location 2.
Port 3 is the port shown in yellow in the below picture.
► Route the tube [03102149
-
xx] from the air service unit to the indicated area in location 1.
► Connect the tube [03102149
-
xx] to the tube of the nozzle changer via the provided "6-4 reducer fit
-
ting" [00386293
-
xx].
► Refit all the removed covers.
Speed (Single-Sided) DLM-RV12 - Option 2
Installation Procedures
Assembly Instructions E by SIPLACE 19
3
3 Speed (Single-Sided) DLM-RV12 - Option 2
Speed (Single-Sided) DLM-RV12 - Option 2
A "SPEED (Single-Sided) option 1" configuration can be enhanced with "SPEED Option 2", which con
-
sists of an additional "NC Speed kit reject bin small" [03113189
-
xx] and a "Module sensor reject box
LOC2" [03102729
-
xx] located at location 2.
3.1
3.1 Installation Procedures
Installation Procedures
► Mount the "NC mounting bracket Speed left" [03108126
-
xx] (1) onto the machine frame using two
5x12 dowel pins and two M5x30 cap screws.
STANDARD SPEED (SS) RV12 SPEED (SS) RV12 OPTION 2
1 Location 1 2 Location 2