00198158-01_AI_Speed_Config_RV12_NC_EN.pdf - 第27页
Speed (Double-Sided) DLM-RV12 - Option 2 Installation Procedures Assembly Instructions E by SIPLACE 27 ► Mount one shim cover [0310839 3 - xx] each o n "NC mounting bracket Speed left" [03108126 - xx] and "…
Speed (Double-Sided) DLM-RV12 - Option 2
Installation Procedures
26 Assembly Instructions E by SIPLACE
Nozzle maga zine type 30xx fo r RV12 [03081446-xx]
Height measurement block SPEED [03119428-xx]
5.1
5.1 Installation Procedures
Installation Procedures
► Mount the "NC mounting bracket Speed right" [03108035
-
xx] onto the machine frame using two 5x12
dowel pins and one M5x30 cap screw.
Active nozzle magazine type (quick reference)
▪ Nozzle magazine type 30xx for RV12
[03081446
-
xx]
Height measurement block SPEED [03119428
-
xx]
Speed (Double-Sided) DLM-RV12 - Option 2
Installation Procedures
Assembly Instructions E by SIPLACE 27
► Mount one shim cover [03108393
-
xx] each on "NC mounting bracket Speed left" [03108126
-
xx] and
"NC mounting bracket Speed" right [03108035
-
xx].
► Place the "Height measurement block SPEED" [03119428
-
xx] onto the shim cover and move the
head holder manually toward the block with care.
► Use a feeler gauge to determine the gap and the number of "NC shims" [03108395
-
xx] required.
Speed (Double-Sided) DLM-RV12 - Option 2
Installation Procedures
28 Assembly Instructions E by SIPLACE
► Place the required shims (1) underneath the shim cover and fasten them with an M3x8 countersunk
screw.
The machine can only accommodate one nozzle station (3) in location 1 (1). There is no nozzle station
in location 2 (2).
The reject bin in location 1 collects both rejected components and rejected nozzles. The reject bin in lo
-
cation 2 reject bin only collects rejected components.