00197044-03_IM_706_1_SP1_705_05_SP1_DE_EN.pdf - 第44页
Station S oftware 70 6. 1 SP1 /705.05 S P1 / Install ation Manual Ausgabe 02/2013 E dition 44 As of s tation softwar e version 7 05.03 you will have t o set, whether the lam p indicator s on the placem ent machine to wer…
Station Software 706.1 SP1/705.05 SP1 / Installation Manual Ausgabe 02/2013 Edition
43
The user settings are displayed.
Figure 7-3: Changing activity level
► Click the Machine service button and enter the password to change into this activity level.
Station Software 706.1 SP1/705.05 SP1 / Installation Manual Ausgabe 02/2013 Edition
44
As of station software version 705.03 you will have to set, whether the lamp indicators on the
placement machine towers shall be displayed two-colored (green / white) or three-colored (green /
white / red) for all placement machines of the SX-series and DX-series. More information about the
two lamp indicator systems can be found in the version description of the 705.03 station software,
item number 00196770-01.
Figure 7-4: Setting lamp indicators
► Select the desired lamp indicators and click the Accept button.
Station Software 706.1 SP1/705.05 SP1 / Installation Manual Ausgabe 02/2013 Edition
45
7.1 X-Series Placement Machines
The following window is displayed for the X-series machines. Here you can edit, confirm or reject
the Auto-configuration.
Figure 7-5: Confirming Auto-configuration for X-series
► Click the Confirm changes and continue startup button to confirm the Auto-configuration.
► If the Coplan computer has been installed, you will additionally have to confirm or reject the 3-D
Coplan sensor.
7.2 X4i S Placement Machine
► When the X4i S placement machine is booted for the first time you have to select the following
options manually:
– If a TrayStak Feeder is used, this has to be defined for each location concerned in the
Auto-configuration.
– Table position (inner and outer)