Error Code List.pdf - 第66页

RL1 31 ERROR CODE LIST 2.4 Errors DA8EEC- 91-210- A0 2.4- 43 2772 V c u t tap e re m a inde r e rror DESCRI PTIO N The tape of the part re m ains af ter V cutting . CAUSE Alt hough the tape has bee n V-cut, the c hi p o …

RL131

ERROR CODE LIST

2.4 Errors

DA8EEC-91-210-A0

2.4-42

2766

PCB recognition error

DESCRIPTION

PCB recognition error was detected.

CAUSE

Trouble occurred in PCB recognition.

SOLUTION

Check the condition of the target hole.

NOTE

2767

PCB recognition error

DESCRIPTION

PCB recognition error was detected.

CAUSE

Trouble occurred in PCB recognition.

SOLUTION

Check the condition of the target hole.

NOTE

2768

Part processing stage cover safety detection

DESCRIPTION

The machine became a safety stop condition by the safety detection in the part processing stage cover safety

detection.

CAUSE

The cover of the part processing stage has been opened

SOLUTION

Press [Return] button after closing the cover. Then please release the safety stop condition to push [[Start]] with

[[ENABLING]].

NOTE

2769

Pulley part cover safety detection

DESCRIPTION

The machine became a safety stop condition|by the safety detection in the pulley part cover.

CAUSE

The machine became a safety stop condition by the safety detection in the pulley part cover.

SOLUTION

Press [Return] button after closing the cover. Then please release the safety stop condition to push [[Start]] with

[[ENABLING]].

NOTE

2770

No Pallet part

DESCRIPTION

No pallet part was detected.

CAUSE

A part supplied from the feeder to the pallet may have dropped during transfer.

SOLUTION

Please check whether the part is set or not on the pallete. If the part exists on the pallet, the sensor may be

malfunctioning.

NOTE

2771

Pallet part catch error

DESCRIPTION

A part on the pallet is tilted.

CAUSE

Please check the condition of a part on the pallet.

SOLUTION

Adjust the part on the pallet.

NOTE

RL131

ERROR CODE LIST

2.4 Errors

DA8EEC-91-210-A0

2.4-43

2772

V cut tape remainder error

DESCRIPTION

The tape of the part remains after V cutting.

CAUSE

Although the tape has been V-cut, the chip of it may remain.

SOLUTION

Please check the condition of the V-cut unit.

NOTE

2773

V cut return error

DESCRIPTION

V cut return error was detected.

CAUSE

V cut return has not been completed properly.

SOLUTION

Please check the condition of the V-cut unit.

NOTE

2774

Supply unit move error

DESCRIPTION

Forward or backward movement of the supply unit is abnormal.

CAUSE

Supply unit movement has not been completed properly.

SOLUTION

Please check the condition of the supply unit.

NOTE

2777

Feeder move error (Return)

DESCRIPTION

Feeder moving error was detected.

CAUSE

Feeder returning has not been completed properly.

SOLUTION

Please check the condition of the feeder.

NOTE

2778

Stockout detect error

DESCRIPTION

There is a possibility of the stockout.

CAUSE

There is possibility that parts are not fully inserted onto the board.

SOLUTION

Please confirm that the board is equip with inserted parts.

NOTE

4066

This is write protected disk.

Please release write protect. Refer to Help for detail.

DESCRIPTION

Unable to write signature to the floppy disk.

CAUSE

Floppy disks formatted by old machine or unformatted disks require a signature.

SOLUTION

Release write protect then operate again.

NOTE

RL131

ERROR CODE LIST

2.4 Errors

DA8EEC-91-210-A0

2.4-44

4067

There is no signature on boot sector. Refer to Help for detail.

DESCRIPTION

Access to unsigned floppy disk

CAUSE

Unsigned floppy disk was used.

SOLUTION

Reformat the floppy disk.

NOTE

9293

Driver soft interlock

DESCRIPTION

Driver soft interlock occurred.

CAUSE

Something is wrong with the software processing.

SOLUTION

Check the conditions of the time when the error occurred, and the details of the error, and then contact us.

NOTE

9294

Soft task comm. Error

DESCRIPTION

Soft task comm. Error occurred.

CAUSE

Something is wrong with the software processing.

SOLUTION

Check the conditions of the time when the error occurred, and the details of the error, and then contact us.

NOTE

9295

Soft calculation error

DESCRIPTION

Soft calculation error occurred.

CAUSE

Something is wrong with the software processing.

SOLUTION

Check the conditions of the time when the error occurred, and the details of the error, and then contact us.

NOTE

9304

Motion incomplete

DESCRIPTION

Axis motion is incomplete.

CAUSE

Movement on the Table X-axis is not completed within a specified time.

SOLUTION

Turn off the servo switch, and manually move the faulty axis. When the axis does not move smoothly, lubricate the

ball screw.

Move the faulty axis with a inching, and inform the manufacturer about its moving condition.

NOTE

9305

Soft parameter error

DESCRIPTION

Axis motion is incomplete.

CAUSE

Movement on the Table X-axis is not completed within a specified time.

SOLUTION

Check the contents of invalid software parameter on the error screen and correct the production data or parameter

data if necessary. In addition, inform us of the problem.

NOTE