SIPLACE D4 规格说明书英文版.pdf - 第19页

19 Component Feeding Component Changeover Table Technical Data Waste container for remaining em pty tape Communication unit Component feeder table Communication unit Tape container Tape container Waste container for rema…

Component Feeding

Component Changeover Table

SIPLACE component change-

over tables are stand-alone

modules that are easy to

maneuver and can be docked

into the machine. This

ensures that the table is accu-

rately positioned in the place-

ment machine. Reels are kept

in the tape container on the

component changeover

table. A cutting device on the

machine automatically cuts

the used tape. The compo-

nent changeover tables can

be set up directly on the

machine or in an external set-

up area with feeder modules.

The benefits of offline set-up

are that the set-ups can be

prepared without stopping

the line. This allows the set-

up to be changed very

quickly using the changeover

table principle.

The component feeders are

at rest during the placement

process, which means that

components can be refilled

and tapes may be spliced

without stopping the

machine. If an optional com-

ponent barcode reader and

the Setup Center option are

installed, it is possible to read

and check the barcodes on

the tape reels. This makes

sure that the component is

allocated to the right track,

and the PCB placement can

be traced using traceability

software.

Dummy feeder modules are

used at unassigned locations

to protect the operators.

Component Feeding

Component Changeover Table

Technical Data

Waste container

for remaining empty tape

Communication unit

Component

feeder table

Communication

unit

Tape container

Waste container

for remaining empty tape

Length

Length with handles folded up

711 mm

871 mm

Width 475 mm

Height of bottom edge of table bed 680 mm for 830 mm PCB transport height

750 mm for 900 mm PCB transport height

780 mm for 930 mm PCB transport height

800 mm for 950 mm PCB transport height

Weight

without feeder modules

with feeder modules at all locations

75 kg

130 kg

Reel diameter

standard

maximum

up to 432 mm (17")

483 mm (19")

Locations for feeder modules max. 12 (3 x 8 mm S)

Changeover time < 1 minute

Component feeding 4 component changeover tables with tape

reel holders and integral waste containers,

12 locations, each 30 mm wide, for each

component changeover table

Feeder module types Tapes, bulk cases, stick magazines, OEM

feeder modules (surf tape, component dis-

posal module, label feeder modules, inline

programming feeder modules)

Component Feeding

S Tape Feeder Modules

Packaging Feeder module Width Loca-

tions

Transport

distance

Max.

CO height

Paper and

blister tapes

2 x 8 mm S

3 x 8 mm S

3 x 8 mm S 01005

3 x 8 mm S 0201

3 x 8 mm SL

1 x 12/16 mm S

a) Extra fiducials provided for feeder position recognition

b) for 01005, 0201 and 0402 in paper tapes

c) For 0201 and 0402 in paper tapes

d) SL = Shutterless, from 0201 in paper or blister tapes

30.6 mm

30.3 mm

2/4 mm

2/4/8 mm

2/4 mm

2/4/8 mm

4/24 mm

e) Variable in 4 mm increments

2.5 mm

0.7 mm

2.5 mm

14 mm

f) PSA Kit available as an option

Blister tapes 1 x 24/32 mm S 42.4 mm 1.5 4/40 mm

14 mm

Tape reels 178 - 483 mm diameter (7" - 19")

Cycle S feeder modules up to 20 mm transport distance < 150 ms

Changeover

time

 15 s