00197295-01_UM_D4i_SR605_EN.pdf - 第24页
1 Introduction User manual SIPLACE D4i 1.5 Important notes on the user manual From software version SR.605.03 SP2 10/2012 EN edition 24 1.5 Import ant notes on the user manual 1.5.1 Content s and fili ng of the user manu…
User manual SIPLACE D4i 1 Introduction
From software version SR.605.03 SP2 10/2012 EN edition 1.4 Operator levels
23
1.4 Operator levels
The operating software is structured so that certain functions or menus can only by used or called
by appropriately trained personnel. There are three different classes of user:
– operator,
– line engineer and
– service engineer.
The operator levels "Line engineer" and "Service engineer" are protected by a password.
Operators 1
The operator class consists of any person who has been trained in operation of the machine.
These people are authorized to use any functions associated with operating the machine and may
call up any menus needed to use the machine.
Line engineers 1
Line engineers have undergone special training and are authorized to carry out line engineer ac-
tivities, such as creating set-up configurations, determining vision parameters, etc.
Service engineers 1
This class is intended for engineers from ASM Assembly Systems GmbH & Co. KG. They are
trained to carry out servicing work and to upgrade and retrofit the machine.
1 Introduction User manual SIPLACE D4i
1.5 Important notes on the user manual From software version SR.605.03 SP2 10/2012 EN edition
24
1.5 Important notes on the user manual
1.5.1 Contents and filing of the user manual
This user manual contains basic information that must be observed when setting up, operating
and maintaining the machine. The service engineers, qualified staff, operators and users must
therefore read it before commencing installation and commissioning. The instructions must be
kept permanently accessible where the machine is used.
In addition, the user must ensure that the employees have fully understood the contents of the
user manual.
1.5.2 Danger notes
WARNING 1
– A thorough knowledge of the relevant part of this user manual is required before carrying out
any work on the machine.
– All work must be carried out by appropriately trained and qualified personnel.
– All warning, caution and danger notes MUST be observed.
– In addition, read through chapter 2 of the user manual carefully.
1.5.3 Liability of the manufacturer/supplier
We draw your attention to the fact that this user manual only contains descriptive and explanatory
material and does not include any contractual conditions or undertakings. All obligations of ASM
Assembly Systems GmbH & Co. KG proceed from the conclusion of the contract concerned, un-
der which you have the machine described herein. This applies in particular to all statements re-
garding performance or service life and the agreed liability for faults or defects. The provisions of
the contract regarding the liability for faults or defect are neither extended nor restricted by any
statements in this user manual.
1.5.4 Revision index
1
1
Manual Software version Edition
Second edition User manual SR.605.03 SP2 10/2012 EN
User manual SIPLACE D4i 1 Introduction
From software version SR.605.03 SP2 10/2012 EN edition 1.5 Important notes on the user manual
25
1.5.5 Further information and contents of the documentation package
1.5.5.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local ASM Assembly Systems dealer or contact
us directly at:
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Str. 44
81379 München 1
1.5.5.2 SIPLACE on the World Wide Web (WWW)
We also have our own site on the Internet. Why not log onto our SIPLACE home page at
http://www.siplace.com?
1
Fig. 1.5 - 1 The SIPLACE home page
All the menus and other information are available in two languages: You can choose between the
German and English versions.
The various headings contain information on