00197295-01_UM_D4i_SR605_EN.pdf - 第41页
User manual SIPLACE D4i 2 Operational safety From software version SR.605.03 SP2 10/2012 EN edition 2.2 Warning labels 41 2.2.3.2 W arning label W205 on the transverse bar below the t ape cutter 2 Fig. 2.2 - 5 Warning la…
2 Operational safety User manual SIPLACE D4i
2.2 Warning labels From software version SR.605.03 SP2 10/2012 EN edition
40
2.2.3 Warning labels on tape cutter and used tape chute
2
Pos. W205 in Figs. 2.2 - 4 and 2.2 - 5, item no. 03009344-01
WARNING 2
If you wish to do work on the tape cutter, you must disconnect the machine from the mains sup-
ply and the compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.
Wear robust protective gloves when working on the tape cutter.
2.2.3.1 Warning label W205 on the used tape chute
2
Fig. 2.2 - 4 Warning label W205 on the used tape chute
Pos. W205, item no. 03009344-01 on the used tape chute (number per machine: 4)
The position of the used tape chute is shown in Fig. 2.2 - 5
, item 4 on page 41.
2
2
2
2
2
2
2
2
RISK OF CUTTING!
Danger of cutting is present even when the machine is
switched off
User manual SIPLACE D4i 2 Operational safety
From software version SR.605.03 SP2 10/2012 EN edition 2.2 Warning labels
41
2.2.3.2 Warning label W205 on the transverse bar below the tape cutter
2
Fig. 2.2 - 5 Warning label W205 on the transverse bar below the tape cutter
(1) Transverse bar
(2) Tape cutter
(3) Used tape channel
(4) Used tape chute
Pos. W205, item no. 03009344-01 on the transverse bars (number per machine: 8)
2 Operational safety User manual SIPLACE D4i
2.2 Warning labels From software version SR.605.03 SP2 10/2012 EN edition
42
2.2.3.3 Warning strips on the used tape channel
2
Fig. 2.2 - 6 Warning strips on the used tape channel
The position of the used tape channel is shown in Fig. 2.2 - 5, item 3 on page 41.
WARNING 2
Never reach into the opening in the used tape channel.