FlexTRAK 2MB Assembly Manual.pdf - 第10页
© 2023 Nordson Corporation 4 3 - Part s Re pl ac em e nt 3.1 Overview This section contains pa rts ordering information fo r the 2MB Electrode Fixt uring Assembly. Figure 3-1 through Figure 3 -4 show available repla cem …
© 2023 Nordson Corporation 3
2 - Safety
2.1 Overview
This section provides safety guidelines that should be followed when servicing the 2MB
Electrode Fixturing Assembly. These guidelines ensure personal safety and protect
equipment during installation, operation, maintenance, troubleshooting, and other
potentially dangerous procedures.
To service the 2MB Electrode Fixturing Assembly, you must be trained by Nordson
MARCH. It is essential that every person fully understands all hazards, risks, and
safety precautions. Refer to the Safety section in the FlexTRAK Installation, Operation,
and Maintenance Manual for additional information.
2.2 Warning Symbol Definitions
Table 2-1 Warning Symbols
Symbol Description
Danger/Warning/Caution: Warns personnel that special caution must be
exercised. Cautionary text next to this symbol stresses the importance of
following proper safety, operation, or maintenance procedures. Otherwise,
personal safety and equipment reliability could be affected.
Thermal Hazard: Warns personnel of hot surfaces that may cause burns if
touched.
2
© 2023 Nordson Corporation 4
3 - Parts Replacement
3.1 Overview
This section contains parts ordering information for the 2MB Electrode Fixturing
Assembly.
Figure 3-1 through Figure 3-4 show available replacement parts.
3.2 Parts Ordering Information
Contact our Customer Service Department at (800) 326-1151 or (925) 827-1240
(FAX: (925) 827-1189) to order parts for your FlexTRAK- 2MB System. When ordering
parts, be prepared to provide the following information:
r
Company Name
r
Shipping Instructions
r
Billing Address
r
Part Number and Description
r
Shipping Address
r
Quantity
r Plasma System Serial Number
(from nameplate on back pane
l)
r Purchase Order Number
3.3 Shipping
When ordering replacement parts, specify your preferred carrier. If no instructions are
received, Nordson MARCH will determine the best shipping method.
3.4 Parts Warranty
Refer to Appendix A – Warranty and Servicing Information in the FlexTRAK-F3
Installation, Operation, and Maintenance Manual for details.
3
FlexTRAK Series 2MB Electrode Fixturing Addendum Parts Replacement
© 2023 Nordson Corporation 5
3.5 Exploded Views
This section contains lists of item numbers corresponding to the part description.
Review the spare parts kits Excel file for the item number referencing the part number
when ordering replacement parts for the FlexTRAK Series 2MB Electrode Fixturing
Assembly. Contact March Technical Support for questions.
Table 3-1 Spare Parts List
Item No. Description
1 ELECTRODE PLATE
2 ELECTRODE STANDOFF
3 ELECTRODE STANDOFF
4 ELECTRODE PLATE
5 ELECTRODE STANDOFF
6 ELECTRODE STANDOFF
7 ELECTRODE PLATE
8 ELECTRODE STANDOFF
9 ELECTRODE STANDOFF