TS555R-UserGuide.pdf - 第14页
14 3. En ter the delay time (ex. 5000 ms) NOTE: The minimum delay time is 15ms 4. To uch the “ Co ntinu ous Run ” ico n 5. To uch the Check Mark icon to save 6. To uch the X icon to exit Th e screen will look similar ly …
13
5.3.2 To run in Continuous Mode
The controller can be setup to repeat the run continuously.
1. Touch the Setup icon to enter the setup screen
2. Touch the “Run Method” icon
14
3. Enter the delay time (ex. 5000 ms)
NOTE: The minimum delay time is 15ms
4. Touch the “Continuous Run” icon
5. Touch the Check Mark icon to save
6. Touch the X icon to exit
The screen will look similarly to the screen below:
Note: If the controller is set to activate memory cell 1 and the delay time is
set at 5000 ms, the controller will activate memory 1 continuously with
5000 ms delay between each activation.
5.3.3 To run in Single Sequence Mode
1. Touch the “Run Method” icon to enter sequence mode setup
15
2. Enter number of memories to be run in sequence (ex. 1 to 3)
3. Touch the “Sequence Mode” icon
4. Touch the Check Mark icon to save
5. Touch the X icon to exit
The screen will look similarly to the screen below:
Notes:
A. If there is no delay time entered in the setting, the operator has
to press the foot switch or touch the Run icon after each
memory cell is completed to activate the next memory cell.
B. If delay time is entered in the setting, the controller will activate
the next memory cell in sequence automatically. Delay time
must be at least 15 ms.