00193908-02.pdf - 第7页
Installation Manual for Windows 2000 Prof essional (manual setup) Edition 10/2005 US 2 Inst allation of the W indows 2000 Professional Operating System 2.1 Inst allation of the Windows 2000 Professional Base sy stem → In…
Installation Manual for Windows 2000 Professional (manual setup) Edition 10/2005 US
1 Introduction
1.1 Scope of the document
This document describes how to install the Windows 2000 Professional operating system.
1.2 System requirements
There are recommended hardware configurations for SIPLACE Pro. Please see the actual Version
description of your application and version for details.
These requirements depend on software application, version and configuration you plan for.
6
Installation Manual for Windows 2000 Professional (manual setup) Edition 10/2005 US
2 Installation of the Windows 2000 Professional
Operating System
2.1 Installation of the Windows 2000 Professional Base system
→ Insert the CD "Windows 2000 Professional" into the CD-ROM.
The message "Press any key to reboot from CD" appears during the startup phase of the computer.
→ Press any key to boot from CD.
The following dialog appears:
Fig. 2-1: Windows 2000 Professional
→ Press Enter to continue.
7
Installation Manual for Windows 2000 Professional (manual setup) Edition 10/2005 US
The dialog "End-user License agreement" appears.
Fig. 2-2: Windows 2000 Professional Licensing Agreement
→ Read the License agreement.
→ Press F8 to agree.
Note:
If an operating system already exists on your computer the message "The following list
shows the existing partitions and unpartitioned space on this computer” appears. In that
case please delete all old partitions. The result is an unpartitioned space.
Normally if the disk is new it is not formatted and you see the following dialog.
Fig. 2-3: Windows 2000 Professional partitions
→ Press Enter.
8