TM5650.Production Lot Operations for APCO.pdf - 第3页
Y AMAHA MOTOR CO., L TD. IM Business Unit SMT Softw are Engi neering Group 1. Introduction The supported models and v e rsions are as follows. Model and V ersion Model V ersion Memo YS Series Mounter YS Series Printer YS…
YAMAHA MOTOR CO., LTD.
IM Business Unit
SMT Software Engineering Group
INDEX
1. Introduction
2. Production Lot Operation
2.1 Outline
2.2 Introduction
Preparation
Setting
2.3 Chapters over view
3. P-Tool: Program List Editor
3.1 Make Program List
Launch Board Explorer
Launch Program List Editor
Create a Program List
Caution
4. Production: Mounter
4.1 [OP003: Auto Program Change Over (APCO)] by Production Lot
Introduction
How to use
Trouble shooting
Caution
5. Production: Printer
5.1 [OP003: Auto Program Change Over (APCO)] by Production Lot
YAMAHA MOTOR CO., LTD.
IM Business Unit
SMT Software Engineering Group
1. Introduction
The supported models and versions are as follows.
Model and Version
Model Version Memo
YS Series Mounter
YS Series Printer
YS Series Dispenser
YS Series Hybrid Placer
V3.41STD R1.000 or later
V4.41 R1.000 or later
Xg Series Machine
* A program file compatibility only
V1.XXSTD R1.000 or later
YG Series Machine
* A program file compatibility only
V2.XXSTD R1.000 or later
IT-System Server Utility V1.41STD R1.000 or later
Y.FacT V1.41STD R1.000 or later
YAMAHA MOTOR CO., LTD.
IM Business Unit
SMT Software Engineering Group
2. Production Lot Operation
2.1 Outline
This function allows you to operate YAMAHA machines by using your own production lot.
Without this function, you need to rename the program name according to the direction sheet.
But with this function, you don’t need to do that because it is possible to link the Yamaha program
from the production lot.
By using this the function, you can use only one program name throughout a production, from
off-line setup to mounting.
As mentioned, you don’t need to make a lot of similar program names, so that you will avoid
selecting a wrong program.
Moreover, you also can classify programs by more detailed conditions.
* e.g. Classify productions by parts type, lank, condition, lot, supplier etc.
2.2 Introduction
Before using this function, please read the following sections.
Preparation
Production lot
Issue a lot as operation unit.
Program (Board Data)
Prepare a program (board data) to use for production.
Program list
You need to create a list to link Production Lot and program. For more details, refer to the
Chapter “3. P-Tool: Program List Editor”.
P-Tool
To create a program list, you have to have Program List Editor in P-Tool.
Therefore, P-Tool’s Program List Editor is a prerequisite to use this fucntion.
Setting
Set up to be able to see Program List over the local network.
* Refer the chapter 4.1, if you use an OP003:APCO.