Vista Machine PC.pdf - 第12页
MACHIN E PC NEXTM OVE 5.12 Technical Reference Manual Chapter Issue 1 S ep 02 NEXTMOVE NextMove is insta lled in the PC enclosure. However , NextMove is a motion controll er and i ts f unctions a re describ ed fully i n …
MACHINE PC
PC ENCLOSURE
Chapter Issue 1 Sep 02 Technical Reference Manual 5.11
PNP / PCI Configuration
PC Health Status
Frequency/Voltage Control
Menu Sub Menu
Parameter Setting Parameter Setting
PNP OS Installed No
Reset Configuration Data Disabled
IRQ Resources IRQ-3 Assigned to PCI/ISA PnP
IRQ-4 Assigned to PCI/ISA PnP
IRQ-5 Assigned to Legacy ISA
IRQ-7 Assigned to PCI/ISA PnP
IRQ-9 Assigned to Legacy ISA
IRQ-10 Assigned to PCI/ISA PnP
IRQ-11 Assigned to PCI/ISA PnP
IRQ-12 Assigned to PCI/ISA PnP
IRQ-14 Assigned to PCI/ISA PnP
IRQ-15 Assigned to Legacy ISA
DMA Resources DMA-0 Assigned to PCI/ISA PnP
DMA-1 Assigned to PCI/ISA PnP
DMA-3 Assigned to PCI/ISA PnP
DMA-5 Assigned to PCI/ISA PnP
DMA-6 Assigned to PCI/ISA PnP
DMA-7 Assigned to PCI/ISA PnP
PCI/VGA Palette Snoop Disabled
Parameter Setting
CPU Warning Temperature Disabled
Parameters Setting
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
CPU Clock Ratio X 3
MACHINE PC
NEXTMOVE
5.12 Technical Reference Manual Chapter Issue 1 Sep 02
NEXTMOVE NextMove is installed in the PC enclosure. However, NextMove is a motion
controller and its functions are described fully in the Machine Controller chapter
of this manual.
The NextMove card sits on the ISA Bus and is itself controlled by the central
processor unit (CPU) in the PC enclosure. This arrangement allows the CPU
to control functions such as the operator interface (the MMI) and provide
general housekeeping functions along with general PC control whilst the Next-
Move card, with its own on-board CPU specifically controls all machine motion.
MACHINE PC
VISION CARD
Chapter Issue 1 Sep 02 Technical Reference Manual 5.13
VISION CARD
The card, fitted to slot PCI 3, is a complete vision system, it utilizes the machine
CPU and Memory as its controller.
The card takes the incoming signal from the camera, processes and returns a
fiducial location coordinate to the alignment algorithm.
Figure 5-5 Vision Card Layout