YS24_Mainte_E.pdf - 第33页
xxx Safety instructions n Label positions W arning/caution labels ■ Head assembly ■ Camera unit ■ SC-axis linear scale section ■ Controller ■ T op of controller ■ Controller front panel 93204-L2-20
xxix
Safety instructions
n
Label positions
Warning/caution labels
Front 2
■ Feeder setup section
(2 locations each on front and rear sides)
■ X axis frame section inner side (front and rear sides)
■ Y axis linear scale
■ Lower panels
(front and rear sides)
3
3
2. Disassembly prohibited.
2
2
3
2
1
1. Never touch.
1. Never touch.
■ Panel inner side
■ Right and left sides
3. Caution on strong
magnetic fields
Linear cover
Linear motor
93202-L2-20
xxx
Safety instructions
n
Label positions
Warning/caution labels
■ Head assembly
■ Camera unit
■ SC-axis linear scale section
■ Controller
■ Top of controller
■ Controller front panel
93204-L2-20
General Contents
Introduction
1. About this manual i
2. Maintenance list ii
Chapter 1 Maintenance
1. Maintaining machine performance 1-1
1.1 Essential conditions and working environment 1-1
1.2 Importance of periodic inspections and cleaning 1-2
2. Preparing for maintenance tasks 1-3
2.1 Consumable parts and replaceable parts (for repairs) 1-3
2.1.1 Consumable parts 1-3
2.1.2 Nozzles 1-6
2.1.3 Replaceable parts (for repairs) 1-8
2.2 Maintenance tools 1-9
2.2.1 Cleaning tools 1-9
2.2.2 Lubricating tools and grease 1-11
2.2.3 Special tool 1-13
2.3 Required tools 1-14
Chapter 2 Daily maintenance items
Before beginning work 2-1
1. Checking the nozzle 2-2
1.1 Check with software 2-2
1.1.1 Vacuum level when nozzle is open 2-4
1.2 Checking the nozzles visually 2-5
2. Cleaning the feeder plate 2-6
Chapter 3 Periodic maintenance items
1. Weekly inspection 3-1
1.1 Checking and cleaning the nozzles 3-1
1.1.1 Checking and cleaning the spring-action parts 3-1
1.1.2 Checking the leaf spring 3-2
1.2 Nozzle cleaning 3-3
1.2.1 Cleaning and lubricating the nozzle buffing area 3-3
1.2.2 Cleaning the nozzle tip 3-4
1.3 Checking the conveyor sensor condition and operation 3-6
1.4 Checking the board clamp condition and operation 3-8
1.4.1 Checking the board clamp condition 3-8
1.4.2 Checking the board clamp operation 3-8
EML217B400