TK25619.NozzleHealthCheck.pdf - 第5页

 SMT Software Engineering Group  IMOperationsYAMAHAMOTOR CO.,LTD MDOC-SOFT50394    5/13  3.4 Nozzle Hea lth Ch e ck comple tion screen Af ter Nozzle Heal th Check is completed, auto-changing nozzles are s t o…

100%1 / 13
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD
MDOC-SOFT50394
4/13
1. Select a table to perform Nozzle Health Check (each table or ALL)
2. Select a nozzle to perform Nozzle Health Check (NG nozzle, board data nozzle, ALL)
3.3 Progress window
This window indicates progress situation of Nozzle Health Check. If you want to stop this
process, press the [Cancel] button.
1. Displays a nozzle type that is currently checked.
2. Displays a checking content in the process.
1
2
1
2
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD
MDOC-SOFT50394
5/13
3.4 Nozzle Health Check completion screen
After Nozzle Health Check is completed, auto-changing nozzles are stored into the nozzle
station with or without any problem.
When a manual-changing nozzle has a problem, the head moves forward and blows. Close
the completion message and turn the blow off.
※ The below is the message displayed when an abnormal nozzle is detected.
3.5 Nozzle Health Check result screen
After Nozzle Health Check is completed, the result is displayed on the [Monitor] - [Nzl Hlth
Chk] screen. If an abnormity is detected, the nozzle is indicated in red with “NG”. On the result
screen, checking results of Schedule Specification and Utility are also applied.
※ Once a nozzle is judged as NG, the subsequent checks of the Nozzle Health Check are no
longer performed for the nozzle.
1. Select items to show on the list. (NG nozzle, board data nozzle, ALL)
1
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD
MDOC-SOFT50394
6/13
3.6 Details of result
Select a nozzle indicated in red on the result screen, and press the [Result Detail] button. The
details of the NG contents are displayed. In the veiw on the right shows an image of the NG
nozzle.
※Images are saved only when it is set to do so on [Software Setting] – [Health Check].
※ Images are taken only at Tip Dirt Check, Shape Check, or Alignment Check.
View from the bottom
View from the side