00198611-02_IM_712.1_R19-1_EN.pdf - 第35页
Station Software Version 7 12.1 (R19-1) / Installation Manual 05/2019 Edition 35 Thereafter, the following dialog box is displayed again. Figure 5- 19 : Installing driv er software for Sontheim device, part 2 ► Perform t…
Station Software Version 712.1 (R19-1) / Installation Manual 05/2019 Edition
34
If Windows cannot verify the publisher of the driver software, the following dialog box is displayed.
Figure 5-16: Verifying driver software
► Select the Install this driver software anyway option.
► If an NI-IMAQ driver is connected, the following dialog box is displayed.
Figure 5-17: Installation driver software for NI-IMAQ Driver
► Activate the Always trust software from "National Instruments Corporation" field.
► Click the Install button to install the corresponding driver software.
If a Sontheim device is connected, the following dialog box is displayed.
Figure 5-18: Installing driver software for Sontheim device, part 1
► Activate the Always trust software from "Sontheim Industrie Elektronik GmbH" field.
► Click the Install button to install the corresponding driver software.
Station Software Version 712.1 (R19-1) / Installation Manual 05/2019 Edition
35
Thereafter, the following dialog box is displayed again.
Figure 5-19: Installing driver software for Sontheim device, part 2
► Perform the same steps as in the previous dialog box.
If a Baumer card is installed, the following dialog is displayed.
Figure 5-20: Installing driver software for Baumer card
► Activate the Always trust software from "Baumer Optronic GmbH" field.
► Click the Install button to install the corresponding driver software.
The setup status is displayed during installation.
Figure 5-21: Setup status
Station Software Version 712.1 (R19-1) / Installation Manual 05/2019 Edition
36
After successful installation, the following dialog box is displayed.
Figure 5-22: Successful installation
► Click the OK button to exit the setup wizard.
The installation is now completed.
► Restart your computer for all changes to take effect.
Optionally, you can now install the station software Language Pack.