00198124-02_JC_PM_WF4_TX_EN.pdf
www.asm-smt.com Workflow 4 Preventive Maintenance SIPLACE TX-Series Edition 08/2016 EN
www.asm-smt.com
Workflow 4 Preventive Maintenance
SIPLACE TX-Series
Edition 08/2016 EN
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks whose use by third parties
for their own purposes could violate the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full
consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00198124-02
www.asm-smt.com Printed by ASM Assembly Systems
www.asm-smt.com
Introduction
Safety Introduction
Equipment required for Workflow 4 Maintenance TX-Series
1 Test the tape cutter
2 Shut down and remove tables and exchange nozzles with JTF-ML
3 Shut down and remove tables and exchange nozzles without JTF-ML
4 Empty and clean nozzle reject bin
5 Remove the TH
6 Return a maintained TH
7 Cleaning the Z-Axis C&P20 P
8 Grease the guide bearing, clean the linear guide and scale of the Y-Axis
9 Grease the guide bearing, clean the linear guide and scale of the X-Axis
10 Check and clean the magnetic surfaces of X- and Y-Axis
11 Clean conveyors, lifting tables, gantry cables
12 Check and clean the gas pressure shock absorber
13 Clean and lubricate the nozzle changer: TH
14 Check and lubricate the docking unit
15 Clean feeder modules and cut the tapes
16 Lubricate the X-feeder table
17 Switch on machine and return the tables with JTF-ML
18 Switch on machine and return the tables without JTF-ML
19 Calibrating the TH
20 Check the cover fans
21 Check filter disc: C&P20 P
22 Check nozzle seating: CPP and C&P20 P
23 Endurance run
Appendix Safety Circuit
Table of Contents