00198124-02_JC_PM_WF4_TX_EN.pdf - 第54页
16 WF 4 TX-Series Maintenance Lubricate the X-feeder table 3 min 2 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e Mac…
16 WF 4 TX-Series Maintenance Lubricate the X-feeder table 3 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3, C4, C31, C33
www.asm-smt.com
1 Undock/ release all feeders. 2 Move all feeders 10 cm back. 3 Spray grease on a cloth.
4 Wipe the centering strip. 5 Lock the feeders in the trolley. 6 Grease the roller on both sides of the
feeder table.
16 WF 4 TX-Series Maintenance Lubricate the X-feeder table 3 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3, C4, C31, C33
www.asm-smt.com
7 Repeat steps 1 to 6 for all tables.
17 WF 4 TX-Series Maintenance Switch on machine and return the tables with JTF-ML 6 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 With JTF-ML: Without JTF-ML, please go
to next task.
2 Switch on machine. 3 Return all COT 2.
4 Close the cover 2. 5 Press insert COT button to dock table. 6 Return all COT 1.