00198124-02_JC_PM_WF4_TX_EN.pdf - 第17页
1 WF 4 TX-Series Maintenance Test the tape cutter 2 min 3 / 3 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e Machine Stat…
1 WF 4 TX-Series Maintenance Test the tape cutter 2 min 2 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C1
www.asm-smt.com
7 Press stop. 8 Open the cover. 9 Place paper in both tape cutters. (size A3).
10 Close the cover. 11 Select both tape cutters. 12 Press start.
1 WF 4 TX-Series Maintenance Test the tape cutter 2 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C1
www.asm-smt.com
13 Press stop. 14 Open the cover. 15 Remove paper.
16 Check edge for clean cut. 17 If NOT OK inform service. 18 Close the cover.
www.asm-smt.com