00198124-02_JC_PM_WF4_TX_EN.pdf - 第38页
9 WF 4 TX-Series Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 5 min 2 / 3 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c …
9 WF 4 TX-Series Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 5 min 1 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89
Wear Part: Consumables:
C3, C5, C49
www.asm-smt.com
1 Mount the grease nipple adapter X-Axis. 2 Mount the stroke limiter X-Axis 0.15 gr
side of grease gun.
3 Move the gantry to possible working area.
4 Position the hose straight onto the lubrica-
tion nipple.
5 Squeeze the grease gun one time. 6 Grease emerges at the grease nipple.
9 WF 4 TX-Series Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 5 min 2 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89
Wear Part: Consumables:
C3, C5, C49
www.asm-smt.com
7 If NOT go to step 9. 8 If YES contact service. 9 Move the X-Axis 30 cm.
10 Repeat steps 5 to 9 twice. 11 Remove the excess grease around the
grease nipple.
12 Repeat steps 4 to 11 for other grease
nipples at the gantry.
9 WF 4 TX-Series Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 5 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89
Wear Part: Consumables:
C3, C5, C49
www.asm-smt.com
13 Clean the linear guide. 14 Clean the X scale guide. 15 Repeat steps 4 to 14 for X-Axis of the
other gantry.