00198124-02_JC_PM_WF4_TX_EN.pdf - 第44页
www.asm-smt.com
11 WF 4 TX-Series Maintenance Clean conveyors, lifting tables, gantry cables 4 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1
Wear Part: Consumables:
C3
www.asm-smt.com
1 Clean gantry cables for Y-Axis. 2 Clean gantry cables X-Axis. 3 Move the gantries to the limit location 1
and repeat steps 1 to 2 for other gantry.
4 Vacuum all loose components on and
around the whole PCB conveyor.
www.asm-smt.com
12 WF 4 TX-Series Maintenance Check and clean the gas pressure shock absorber 4 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3
www.asm-smt.com
1 Clean the cover sliding surface. 2 Open and close the cover several times. 3 Check if any oil visible.
4 If no oil go to step 6. 5 If NOT OK contact service for exchange. 6 Repeat steps 1 to 5 for the second ab-
sorber.