00198124-02_JC_PM_WF4_TX_EN.pdf - 第40页
www.asm-smt.com
9 WF 4 TX-Series Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 5 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89
Wear Part: Consumables:
C3, C5, C49
www.asm-smt.com
13 Clean the linear guide. 14 Clean the X scale guide. 15 Repeat steps 4 to 14 for X-Axis of the
other gantry.
www.asm-smt.com
10 WF 4 TX-Series Maintenance Check and clean the magnetic surfaces of X- and Y-Axis 4 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T3
Wear Part: Consumables:
C3
www.asm-smt.com
1 Move the gantries to the limit location 1. 2 Check X-Axis magnets for contamination
and damage.
3 If you see any damage contact service.
4 If OK clean the X-Axis magnets. 5 Check Y-Axis magnets for contamination
and damage.
6 If you see any damage contact service.