00198124-02_JC_PM_WF4_TX_EN.pdf - 第74页
www.asm-smt.com
22 WF 4 TX-Series Maintenance Check nozzle seating: CPP and C&P20 P 2 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 Select all CPP or C&P20 P heads. 2 Click on "pick up nozzles" icon. 3 Click on "check nozzles seating" icon.
4 Check if result OK (green hook). 5 If results is NOT OK (red cross) contact
service.
www.asm-smt.com
23 WF 4 TX-Series Maintenance Endurance run 5 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 Click on "endurance run after mainten-
ance" icon.
2 Check results. 3 If result is NOT OK (red cross) save report
and contact service.
4 Click on "display production status" icon. 5 Stop production and click on "block trans-
port" icon.
6 Unblock both lanes and click "OK".