3m-mediawebserver.pdf - 第50页
45 W orkstation Products Cleaning Products and Ionizer Selection Guide 3M ™ Ionizer Selection Guide Model 960 963 980 991 T ype Single DC Blower x x Overhead T riple Fan DC Blower x T ool DC Blower x x Ionizer Gun x Appl…
44
Workstation Products
For more product information, please visit www.3M.com/static
3M
™
Clean Walk Mats
3M Clean Walk Mats 5830 are designed to remove dirt and contaminants
from shoe soles, wheels and other passing objects on contact. When
the top sheet becomes soiled, it can be peeled back to reveal a clean
adhesive sheet underneath.
3M
™
Worksurface Cleaning Products
The 3M Static Control Surface Mark Remover 8001 is an extra-strength
fluid that is designed to remove ordinary dirt and grime as well as
difficult spots and stains from all types of static control surfaces, such
as table mats, floor mats, hard-laminate benchtops, portable field-
service kit work surface, etc. Unlike many cleaning products, the 3M
Static Control Surface Mark Remover 8001 is not corrosive, per FTMS
101C, Method 3005, and leaves no tacky residue that attracts dirt,
attacks delicate parts, or increases the contact resistance of the surface.
It is a clear, colorless, homogeneous, water-based liquid that contains
detergents, conditioners and other cleaning additives and has a fresh,
clean scent.
3M laboratory tests have proven the cleaner to be an excellent topical
antistat, maintaining a consistent surface resistivity (1x10
11
ohm/square)
over extended periods in both normal (55% RH) and dry (13% RH)
environments. Simply spray on any washable surface and wipe off with a
clean cloth or sponge — no rinsing required. The cleaner is designed to be
used full-strength and supplied in handy quart spray bottles.
3M
™
Static Control Surface Mark Remover 8001
Product No. Description
5380
Clean Walk Mats, 30 mats per pad
Size, in. (cm)
18 x 36 (45.7 x 85.7)
18 x 45 (45.7 x 114.3)
25 x 45 (63.5 x 114.3)
Product No. Description
8001
Surface Mark Remover
Size: 1 quart spray (32 oz.)
Shelf-life: two years
3M
™
Clean Walk Mats 5830
Product No. Description
ANTISTAT1QT or
ANTISTAT1GAL
Topical Antistat Spray
Size: 1 quart spray (32 oz.)
1 gallon jug
Product No. Description
LOTION8OZ or
LOTION1GAL
Static Safe Hand Lotion
Size: 8 oz.
1 gallon
3M
™
Topical Antistatic Spray
Staticide is a safe, easy-to-use, topical antistatic solution that can be applied
to walls, ceilings, floors, carpets, fixtures, worksurfaces, tools, equipment,
conveyor belts, clothing, and other materials to render them non-static
generating. Meets the requirements for topical antistats as required in
MIL-HDBK-263. Available in 1 quart spray bottle or 1 gallon jug.
3M
™
Static Safe Hand Lotion
This static dissipative, non-contaminating lotion keeps skin moist for
better contact between the wrist strap and the skin, as recommended
by MIL-HDBK-263. Available in 8 oz. or 1 gallon plastic bottles.
45
Workstation Products
Cleaning Products and Ionizer Selection Guide
3M
™
Ionizer Selection Guide
Model 960 963 980 991
Type
Single DC Blower x x
Overhead Triple Fan DC Blower x
Tool DC Blower x x
Ionizer Gun x
Applications
Workbenches x x x
Tools x x
Material Handling x x x
Industries
Electronics Assembly x x x x
Back End Semiconductors x x x x
Military x x x x
Medical Equipment x x x x
Aerospace x x x x
46
Workstation Products
For more product information, please visit www.3M.com/static
3M
™
Overhead Air Ionizer 991
Using steady-state DC ion emission, the 3M Overhead Air Ionizer
991 provides consistent static control coverage. With its overhead
mounting system, the ionizer doesn’t compromise valuable space on
the workbench, allowing for neutralization of static charges. The steady-
state DC ion emission allows fast discharge with low airflow, providing
a more comfortable work environment for operators. Emitter points are
placed behind the fan to virtually eliminate field-induced charge and to
provide a homogenous mixture of ionized air. Also featured are open-
cell foam filters on the fan intakes, protecting the internal components
from environmental contamination.
3M
™
Overhead Air Ionizer 991
Specifications
Property Typical Values
Ion Emission Steady-state (DC)
Emitter Points 0.12 in. (3.048 mm) tungsten wire,
internally shielded, 2 year life estimated
Air Flow 114 CFM (per fan, high speed, free-air)
Audible Noise 63 dB, high fan speed ohm
57 dB, low fan speed ohm
Power Inlet IEC60320 (with removable line cord)
Input Voltage 100-230 Vac, 50/60 Hz, 27 watts max.
Input Current 0.4A max.
Power 27W max.
Discharge Time ≤ 8 seconds directly under each fan at
18 in. (46 cm) distance; high fan speed
Offset Voltage Balance ≤ ±20 volts directly under each fan at
18 in. (46 cm) distance; high fan speed
Power Outlet IEC60320 female, unfused,
5A maximum load
Alarm Relay Course Modular handset jack, rated 1A
maximum, 30 volts
Coverage Area 2 ft. W x 4 ft. L (61 cm x 122 cm)
directly under ionizer
Controls Power/fan speed slide switch: High/Off/
Low settings
Indicators Bi-color LED: green power ON; red power
supply failure
Daisy-Chain Capacity 10 units maximum
Chassis Aluminum with epoxy-polyester
powder coated
Mounting Four eyebolts and 1-1/8 in.
S-hooks provided
Dimensions 4 H x 6 W x 44 in. L
(10.1 x 15.2 x 111.7 cm)
Operating Environment
Temperature 50°F–95°F (10°C–35°C)
Humidity 20–55% RH (non-condensing)
Ozone Level < 0.010 ppm
RoHS Compliant Yes
Weight 10 lbs. (4.5 kg)
Certifications cULus, TUV-GS, CE, C-Tick
Product No. Description
991F
Replacement Filters, three filters/pkg
Product No. Description
991
Overhead Air Ionizer 991 with North America
Power Cord (98-0798-5683-1)
Overhead Air Ionizer 991 with UK Power Cord
(98-0798-5684-9)
Overhead Air Ionizer 991 with Germany Power Cord
(98-0798-5694-8)
Overhead Air Ionizer 991 with China Power Cord
(98-0798-5695-5)
RoHS
Compliant
2002/95/EC