3m-mediawebserver.pdf - 第59页
54 W orkstation Products For more pr oduct information, please visit www .3M.com/static 3M ™ T elecommunications Field Service Kit (Standard Performance) The 3M Static Dissipative Field Service Kit 8502 is a specially de…
53
Workstation Products
Field Service Kits
3M
™
Portable Field Service Kit
(Standard Performance)
The 3M Portable Field Service Kit 8501 is designed to provide effective
static protection in a compact package for the electronics field technician.
The entire kit folds to a size that fits easily into most tool cases. Two
pockets sewn into the worksurface provide storage for the cords.
3M
™
Portable Field Service Kit 8501
Custom logo imprinting on the worksurface is available.
Tested per ESD Association Standard 4.1 at 72OF, 50% RH using 3M
™
Test Kit 701 for Static
Control Surfaces (Megohmmeter).
8501 Properties
Typical Property Value
Resistance: 1 x 10
6
ohm to 1 x 10
9
ohm
(Surface-to-ground)
Product No. Description
8501
Static Dissipative Portable Field Service Kit
Kit includes:
• Static-Dissipative Worksurface
0.021 H x 22 W x 24 in. L
(0.53 x 56 x 61 cm)
• 3M
™
Ground Cord Assembly 3051
• 3M
™
Alligator Clip 3038
• 3M
™
Adjustable Wrist Band 2204
3M
™
Portable Field Service Kit
(Premium Performance)
The 3M Portable Field Service Kit 8507 with a 3M
™
Wrist Strap
Monitor 725 bundles together two static control products to give a field
technician the same continuously monitored, static protected working
environment as that enjoyed by workers in a manufacturing facility.
3M
™
Portable Field Service Kit 8507
Product No. Description
8507
Portable Field Service Kit includes Wrist Strap Monitor
725 and Dual Conductor Wrist Strap
Kit contains:
• Static Dissipative Worksurface, foldable,
0.021 H x 22 W x 24 in. L (0.53 mm x 56 cm x 61 cm)
red with gray cotton edging. Two pockets, each
8 in. x 11 in. (20.3 cm x 28.0 cm), ground snap.
• 3M
™
Wrist Strap Monitor 725, 2.5 H x 2.6 W x 1.1 in. L
(6.4 x 6.6 x 2.8 cm), black. Battery-powered, 9 V (not
included). Ground cord, 6 ft. (1.8 m), with ground clip.
Ground snap on unit to connect to the worksurface.
• 3M
™
Dual Conductor Adjustable Fabric Wrist Band 2368
• 3M
™
Dual Conductor Coiled Cord 2370, 10 ft. (3.0 m)
54
Workstation Products
For more product information, please visit www.3M.com/static
3M
™
Telecommunications Field Service
Kit (Standard Performance)
The 3M Static Dissipative Field Service Kit 8502 is a specially designed
static dissipative kit for installation in remote, unattended telephone
switching enclosures.
The worksurface has a strip of 3M Hook and Loop Fastener Tape
stitched to the back so it can be left suspended from the permanently
mounted instruction sign.
3M
™
Field Service Kit
This Field Service Kit provides a complete, portable, static safe
workstation for personnel working with electronics in the field. To stop
static electricity from damaging electronic cards, a static safe work
area is essential for field service technicians performing in-field repair
or installation of cards. The Field Service Kit is used by technicians
in telecommunications, computer, industrial controls and business
equipment service applications. The entire kit folds to fit into most tool
cases. Custom mat printing is available. Includes 24 in. x 24 in. (61 cm
x 61 cm) mat with two pockets, wrist strap, ground cord and instructions.
3M
™
Static Dissipative Field Service Kit 8502
3M
™
Field Service Kit FSKL3RD
Tested per ESD Association Standard 4.1 at 72OF, 50% RH using 3M
™
Test Kit 701 for Static
Control Surfaces (Megohmmeter).
8502 Properties
Typical Property Value
Resistance: 1 x 10
6
ohm to 1 x 10
9
ohm
(Surface-to-ground)
Properties
Product Typical Value
Mat 3-layer, vinyl, red, 10
7-8
Common Ground Cord 15 ft. (4.6 m), 1 meg resistor, bulldog clip
Coiled Cord 6 ft. (1.83 m), 1 meg resistor
Wrist Band Fabric, adjustable
Product No. Description
8502
Static Dissipative Portable Field Service Kit for remote,
unmanned telephone switching sites
Kit includes:
• Static-Dissipative Worksurface
0.021 H x 22 W x 24 in. L (0.53 mm x 56 cm x 61 cm)
(0.53 mm x 56 cm x 61 cm) with two pockets
• Two 5 ft. (1.5 m) coiled ground cords; one for mat,
one for wrist band
• 3M
™
Adjustable Wrist Band 2204
• Static Caution Sign
• Plastic Instruction Sign
Product No. Description
FSKL3RD
Field Service Kit
Kit includes:
1 - 24 in. x 24 in. (61 cm x 61 cm) Mat with
two pockets
1- Adjustable Fabric Wrist Band
1- 6 ft. Coiled Cord
1- Common Ground Cord, 15 ft. (4.6 m) with clip
instructions
55
Workstation Products
Field Service Kits and Workstation Accessories
Image Product No. Description
3047
Common Point Grounding System, 10 ft. (3 m) to ground workstation components.
Single-row, six-terminal strip, protective cover, three cable clips. Ground cord has a
1 megohm resistor.
3048
Grounding System for 3M
™
Wrist Strap/Table Mat. Easily snaps onto mats and runners,
(10 mm snap); grounds two single conductor wrist straps. Comes complete with ring
connector and 15 ft. (4.6 m) ground cord. Ground cord has a 1 megohm resistor for mat
connection only.
LPCGC151M
LPCGC150M
This low profile common point ground cord is less obtrusive in the work area. The
system connects two wrist straps and a work surface to ground. Holes are provided for
permanent mounting to a bench. Available with either a 3/8 in. (10 mm) stud or socket
that securely snaps the cord to the mat. A ring terminal connects the opposite end of
the 15 ft. (4.6 m) cord to ground.
3050
Snap Fastener, female, 10 mm diameter. For 3M
™
Table and Floor Mats and Runners
8200 Series.
3051
Ground Cord with center snap for standard field service kits. Wrist strap cord section
10 ft. (3.0 m) and ground cord section 5 ft. (1.5 m). Each contains a 1 megohm resistor.
3057
Monitor Stand-By Jack. Allows operator to disconnect a ground cord from the wrist
band and leave the workstation without deactivating the 3M
™
Wrist Strap Workstation
Monitor 724 or 3M
™
Static Monitor 790.
SP3010
Soldering Tool. 3M’s SP3010 Soldering Tool will help you form component leads, probe
circuit cards, and chase wire and leads. Tough glass-filled nylon plastic makes this tool
durable and long lasting.
SNAPTOOL
This simple-to-use tool attaches snaps to static mats. Three easy steps give you a
secure snap with good electrical connection. Rugged and rust resistant, the snap tool
allows you to put a grounding snap right where you need it.
SNAPSOCKET3/8
Socket snaps are held in place by crimping the tip of an eyelet through the center of
the socket with a snap tool. This traps the mat between the socket on the top of the
mat and the eyelet on the back of the mat. 10 sockets and eyelets are included in each
pack. Use with SNAPTOOL.
SNAPSTUD3/8
Stud snaps are held in place by crimping the tip of an eyelet through the center of the stud
with a snap tool. This traps the mat between the stud on the top of the mat and the eyelet on
the back of the mat. 10 studs and eyelets are included in each pack. Use with SNAPTOOL.
FPSNAP
Prong clinch snaps are held in place by putting the prongs through the mat and crimping
them on the bottom of the mat. No special tools are needed.
3M
™
Workstation Products Selection Guide