00198611-01_IM_712.0_R18-2_EN.pdf - 第15页

Station Software Ver sion 712.0 (R18 - 2) / Installation Manual 11/2018 Edition 15 4.1.3 Embedded Software 4.1.3.1 Composi tion of the File Name 1..6 7 8 9 10 11 12 13 14 15 16 17 18 19 Sub - system name Sepa - rator Var…

100%1 / 78
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
14
4 Requirements
4.1 Software Components of SIPLACE Series X, X S, SX, DX, CA and
TX
4.1.1 Station
– Microsoft .NET 4.6.1 (must be installed manually)
– The station only uses one of the following operating system configurations on the station
computer and Coplan computer/feeder computer:
– Microsoft Windows Embedded Standard 7 (WES7, 32-bit or 64-bit)
– Microsoft Windows 10 IoT (Win10), 64-bit on TX-series placement machines
The station computer must be equipped with at least 2 GB memory (RAM) with WES7, 32-bit
and 4 GB memory (RAM) with WES7 and Win10, 64-bit respectively. If necessary, station
computers in the field must be exchanged or upgraded with a memory extension. Please refer
to the Technical Information TI2014-09E04.
4.1.2 Machine Components
The following versions of other machine components are required for the station software to
function correctly:
SIPLACE station software SIPLACE Vision SIPLACE Pro
Version 712.0
*)
Version 561 Version 16.0
**)
*)
in compatible mode: Version 711.2©
**)
in compatible mode: SIPLACE Pro 15.x
CAUTION
The functional statuses of the station computer, Vision computer and SIPLACE Pro
software must be compatible, as specified above. Another configuration is not supported.
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
15
4.1.3 Embedded Software
4.1.3.1 Composition of the File Name
1..6 7 8 9 10 11 12 13 14 15 16 17 18 19
Sub-
system
name
Sepa-
rator
Variant ID Hard-
ware ID
1)
Target
2)
Version Release . File type
Please
refer to
table in
section
4.1.3.2
_ 0 = no
variant
00
0 = BIOS 00
H
00
H
. HEX
_ A =
Variant
(SOKO)
…
… … … . JED
_ ... 99 9 = App 9 FF
H
FF
H
. BHX
Table 4-1: Composition of the file name
1)
Change compared with old file name (from one to 2 digits)
2)
Extended to second CAN
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
16
4.1.3.2 Comparison of Old and New Names of the Subsystems
Old subsystem name
(<7xx)
New subsystem name
(7xx)
Name
A AXIALL General axes (including free axis),
excluding DP axes of the C&P20A head
B COMTAB Component table
C VHSAXS Star axis of C&P20A head
E IOMODU CAN I/O module
F (Replaced by AXIALL) Free axis
G TAPCUT Tape cutter
H VHSHED C&P20A head
I TWIHED Twin Head
J VHSAXD DP axis of C&P20A head
L TWIAPR / VHSAPR Pressure regulation valve
(Twin Head / C&P20 head)
M MTCHNG MTC
N ---
O ---
P TWIAXZ Z-axis, Twin Head
Q ---
R TWIAXD DP axis, Twin Head
T CONVEY PCB conveyor
U FEEDER Feeder
V ILLUMI Vision
W VHSAXZ Z-axis, C&P20A head
X GANAXX X-axis
Y GANAXY Y-axis
--- CCPAPR
1)
Pressure regulation valve, CPP head
--- CPPAVA
1)
Valve cluster, CPP head
--- CPPAXD
1)
DP axis, CPP head
--- CPPHED
1)
CPP head
--- CPPSCO
1)
Component sensor