00198611-01_IM_712.0_R18-2_EN.pdf - 第67页
Station Software Ver sion 712.0 (R18 - 2) / Installation Manual 11/2018 Edition 67 7.9 Storing Calibr ation Data in t he EEPROM In order to use the fast head exchange feat ure, the head specifi c calibration data has t o…
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
66
7.8 Necessary Calibration Steps
After the first booting of the station software, some calibration steps are required.
Requirements:
– The embedded SW versions have been updated.
– The reference run has been successfully performed.
– A calibration nozzle (1235) has to be available on every C&P20A placement head at
segment 1.
Figure 7-2: Required calibration steps
► Select the calibration steps that are highlighted in the figure and click on Next.
► Select all possible components in the following input masks (all conveyor lanes, all gantries, all
nozzle changers).
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
67
7.9 Storing Calibration Data in the EEPROM
In order to use the fast head exchange feature, the head specific calibration data has to be stored
in the EEPROM. For placement heads with no head specific calibration data stored within the
EEPROM, the available data on the station computer will be stored in the EEPROM of the
respective placement head as follows.
Requirement:
The embedded SW versions have been updated.
Figure 7-3: Storing calibration data in the EEPROM
► Perform the highlighted function for each placement head.
NOTICE
After the storing calibration data step, the message 37200 Changed heads
detected
should disappear. Otherwise you must reboot the machine. If the message
still is displayed after rebooting, please inform the ASM Service.
Station Software Version 712.0 (R18-2) / Installation Manual 11/2018 Edition
68
8 Modifying the Installation
The Modify option allows you to change the current installation entries, e.g. machine ID, serial
number and machine type.
8.1 Modifying the Station Software Installation
► Log in under the ASM_Admin user account on the station computer.
► Insert the installation media and mount the *.iso file.
► Open Windows Explorer.
► Double-click the BundleInstaller.exe file to modify the station software.
The Welcome dialog box is displayed.
Figure 8-1: Welcome dialog box
► Select Modify.
► Click the Next button.